We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R412010198 (BCP-150-034-SB) AVENTICS - Serie BCP
Part number
R412010198
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412010198 (BCP-150-034-SB) AVENTICS - Serie BCP R412010198, make contact with FAMAGA, the world's principle retailer of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each customer. We cherish everyone, who liased with us - hence, our regular customers bring in the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such clients, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uganda, Thailand, Cambodia, South Sudan, Italy, Indonesia, Bulgaria, Finland, France, Gambia, Liechtenstein, Tunisia, Guinea, Ireland, Uzbekistan, Norway, Cameroon, Bhutan, Kiribati, Eswatini, Comoros, Vietnam, Namibia, Switzerland, Poland, Antigua and Barbuda, Tonga, Australia, Sierra Leone, Nepal, Argentina, India, Pakistan, Ecuador, Burundi, Brazil, Nigeria, Laos, Swaziland, Slovakia, Kyrgyzstan, Bosnia and Herzegovina, Kazakhstan, Paraguay, Dominica. A well-elaborated logistics link and a partnership network assist us to conduct our products anywhere in the world with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this quantity is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Bellow actuator with cover |
Functional principle | Single-acting, retracted without pressure |
Working pressure min./max. | 0 ... 8 bar |
Ambient temperature min./max. | -40 ... 70 °C |
Medium | Compressed air |
Permissible angle of tilt max. | 15 ° |
Pressure for determining forces | 6 bar |
Weight | See table |
Compliance with the minimum height H min. as well as the maximum height H max. must be ensured with end stops. Use at operating height ≥ Hmax: only permitted upon approval by AVENTICS Further information on vibration isolation can be found in the “Technical information” document (available in the MediaCentre). | |
Reduced service life at a temperature greater than | 50 °C |
Material |
---|
Bellow | caoutchouc/butadiene caoutchouc |
Front cover | Steel, galvanized |
End cover | Steel, galvanized |