Aventics (brand of Emerson) R422100992
  Aventics (brand of Emerson) R422100992

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R422100992 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R422100992

Description

Actuating control double solenoid
Switching principle 5/3
Version Spool valve, positive overlapping
Housing Polyamide fiber-glass reinforced
Sealing material Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber
Connector standard DIN EN 60947-5-2
Protection class IP65
Number of wires 3-pin
Port size M8
Type Plug
Nominal flow Qn 1300 l/min
Compressed air connection input G 1/4
Compressed air connection output G 1/4
DC operating voltage 24 V
Activation Electrically

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R422100992

If you are inspecting Aventics (brand of Emerson) R422100992, make contact with FAMAGA, the world's main vendor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each purchaser. We esteem everyone, who joined with us - so, our regular customers procure the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe . A well-elaborated logistics connection and a partnership network cheer us to dispatch our elements anywhere in the globe on-time without disreputing product quality.

A specific source of honor for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of factory-made equipment.

All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.

To get some advice or order, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features R422100992

Version Spool valve, positive overlapping
Activation Electrically
Sealing principle Soft sealing
Working pressure min./max. See table
Control pressure min./max. 3 ... 10 bar
Ambient temperature min./max. -10 ... 50 °C
Medium temperature min./max. -10 ... 50 °C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 ... 5 mg/m³
Nominal flow Qn 1300 l/min
Connector standard DIN EN 60947-5-2
Protection class acc. to DIN EN 61140 Electrically Class III
Protection class with connection IP65
LED status display Yellow
Duty cycle 100 %
Typ. switch-on time 12 ms
Typ. switch-off time 13 ms
Mounting on manifold strip P-strip
Mounting screw tightening torque 2,5 Nm
Weight 0,279 kg
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Material
Housing Polyamide fiber-glass reinforced
Seals Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber
Front plate Polyamide fiber-glass reinforced
Threaded bushing Brass Die cast zinc, nickel-plated chrome-plated