We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820059321
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820059321, reach FAMAGA, the world's the best producer of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and particular attention to each consumer. We admire everyone, who conspired with us - therefore, our regular clients receive the most convenient purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such clients, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Equatorial Guinea, New Zealand, Congo, Angola, Bahamas, Swaziland, Thailand, Botswana, Belgium, Liechtenstein, Belize, North Korea, Malawi, Mauritania, Azerbaijan, Macedonia, Tonga, Saudi Arabia, Nigeria, Kenya, Latvia, Togo, Brazil, Djibouti, Comoros, Malta, Eswatini, Central African Republic, The Bahamas, Sweden, Niger, Iceland, United States, Jordan, Chile, Laos, Greece, Morocco, Israel, Paraguay, Tunisia, Bulgaria, Ghana, Mauritius. A well-shaped logistics system and a partnership network help us to ship our elements anywhere in the earth immediately without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1300 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 13 ms |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Weight | 0,279 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |