We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822240408
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822240408, make contact with FAMAGA, the world's the best provider of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of goods and special attention to each buyer. We appreciate everyone, who engaged with us - therefore, our regular customers bring in the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Dominican Republic, Côte d\'Ivoire, Saudi Arabia, Vietnam, Japan, Haiti, Iraq, Mozambique, Tonga, Congo, Eswatini, India, Burundi, Madagascar, Mali, Armenia, Lebanon, Jordan, Chad, Brazil, Lithuania, Dominica, Pakistan, Austria, Botswana, Morocco, Kiribati, Mongolia, Uzbekistan, Philippines, Turkmenistan, Kazakhstan, Niger, Comoros, Norway, Montenegro, Chile, Rwanda, Belize, Senegal, New Zealand, Ukraine, Sudan, Uganda, Andorra. A advanced logistics link and a partnership network allow us to send our units anywhere in the world as soon as possible without undermining product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or book, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |