We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5776625302
Description
Standardization | NAMUR |
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Die cast zinc,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Qn 1▶2 | 1200 l/min |
Qn 2▶3 | 1200 l/min |
Nominal flow Qn | 1200 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | Namur base plate |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5776625302, make contact with FAMAGA, the world's chief supplier of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of outputs and personalseparate attention to each user. We cherish everyone, who cooperated with us - thus, our regular buyers get the most acceptable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4500 such customers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Congo, Bahrain, Netherlands, Norway, Liberia, Iraq, Zimbabwe, Czech Republic, Qatar, Cuba, United Arab Emirates, Cape Verde, Angola, Montenegro, Botswana, Estonia, Honduras, The Gambia, Japan, Guatemala, Samoa, Uganda, Mali, Afghanistan, Namibia, New Zealand, China, Peru, Guyana, Malta, Nicaragua, Latvia, Egypt, Paraguay, Switzerland, Indonesia, Belarus, Poland, El Salvador, Yemen, Suriname, Togo, Mauritius, Syria, Cyprus. A well-developed logistics series and a partnership network cheer us to deliver our items anywhere in the globe promptly without disreputing product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as stay in control.
To request or order, contact us or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Standards | NAMUR |
Working pressure min./max. | 2 ... 10 bar |
Control pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 50 °C |
Medium temperature min./max. | -25 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 1200 l/min |
Nominal flow 1 ▶ 2 | 1200 l/min |
Nominal flow 2 ▶ 3 | 1200 l/min |
Compressed air connection | according to ISO 228-1 |
Pilot control exhaust | with directional pilot air exhaust |
Connector standard | EN 175301-803:2006 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | 13 14 |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die cast zinc Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |