We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822395600
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822395600, connect FAMAGA, the world's top retailer of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each customer. We value everyone, who liased with us - therefore, our regular buyers obtain the most acceptable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, France, Guyana, Benin, Qatar, Malawi, Dominica, Zambia, Mali, Chile, Kiribati, Saudi Arabia, Zimbabwe, Kazakhstan, Hungary, India, Tonga, Senegal, Paraguay, Liechtenstein, Afghanistan, Equatorial Guinea, Latvia, Turkmenistan, Slovakia, Kyrgyzstan, Serbia, Ecuador, Tanzania, Algeria, Georgia, Turkey, East Timor, Argentina, Sierra Leone, North Korea, Iran, Uruguay, Macedonia, Burundi, Croatia, Brazil, Vietnam, Eswatini, Lithuania. A well-developed logistics series and a partnership network allow us to ship our elements anywhere in the planet promptly without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |