We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820061797
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820061797, catch up with FAMAGA, the world's principle distributor of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of outcomes and personalseparate attention to each user. We cherish everyone, who joined with us - therefore, our regular clients accept the most helpful purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such clients, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Andorra, Belgium, Mali, Iran, Moldova, Grenada, Vietnam, Monaco, Sweden, Serbia, Zimbabwe, Armenia, Cyprus, Central African Republic, Gambia, Guinea, Seychelles, Antigua and Barbuda, Ukraine, United States, Georgia, Nigeria, Croatia, Egypt, Ecuador, Thailand, Kyrgyzstan, Morocco, Ghana, Mongolia, Guatemala, Cameroon, Tonga, Czech Republic, Niger, Australia, Brazil, Hungary, Tajikistan, Senegal, Uruguay, Kiribati, Iraq, Algeria, Kenya. A well-shaped logistics link and a partnership network cheer us to deliver our goods anywhere in the earth on-time without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 700 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 10 ms |
Typ. switch-off time | 11 ms |
Weight | 0,165 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |