We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019007
Description
ball rail guide | With integrated “High Performance” ball rail system |
double piston | with double piston |
Functional principle | double-acting |
Cushioning | hydraulic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 200 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412019007, reach FAMAGA, the world's chief distributor of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each customer. We esteem everyone, who liased with us - so, our regular purchasers bring in the most convenient purchase terms and discounts on the factory-made equipment market. Now, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Dominican Republic, Azerbaijan, Nicaragua, Spain, Hungary, Finland, Vietnam, Mauritius, Turkmenistan, Guyana, Dominica, Malaysia, Armenia, Nepal, Romania, Belgium, Egypt, Uganda, Mongolia, Kyrgyzstan, Philippines, Ghana, Kuwait, Greece, Brunei, Rwanda, Fiji, Mexico, Morocco, Montenegro, Botswana, Indonesia, Latvia, Argentina, Russia, Bosnia and Herzegovina, Serbia, Croatia, Togo, Senegal, Poland, Swaziland, China, Cameroon, Cyprus, United States. A well-developed logistics link and a partnership network help us to ship our units anywhere in the world with no delay without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, phone us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Repetitive precision | 0,02 mm |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Repetitive precision after 100 consecutive strokes: 0,02 mm Base with air connections at the back and sides Intermediate strokes can be configured. Scope of delivery: incl. centering rings R1 = stroke setting range for forward stroke R2 = stroke setting range for return stroke |
Material |
---|
Housing | Aluminum, anodized |
Piston rod | Stainless steel |
Front plate | Aluminum, anodized |
Seal | Polyurethane |
Ball rail table | Aluminum, anodized |
Guide rail | Steel, hardened |
Centering rings | Stainless steel |