We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009231
Description
Parts | Standard oil-mist lubricator |
Type of filling | Semi-automatic oil filling during operation,Manual oil filling |
Protective guard | with protective guard |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 15800 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412009231, communicate with FAMAGA, the world's principle retailer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each user. We value everyone, who liased with us - hence, our regular consumers accept the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Palestine, Angola, Belize, Italy, Mozambique, Namibia, Macedonia, Sierra Leone, Russia, Ecuador, Equatorial Guinea, Eswatini, Peru, Central African Republic, Liberia, Oman, Israel, Costa Rica, Samoa, Mexico, Andorra, Yemen, Uruguay, United States, Iran, Comoros, Montenegro, Uganda, Swaziland, Brazil, Thailand, Senegal, Egypt, Antigua and Barbuda, Burundi, Lithuania, Denmark, Armenia, Nepal, Paraguay, New Zealand, Iceland, Qatar, Norway, Slovakia. A well-shaped logistics series and a partnership network help us to dispatch our products anywhere in the world immediately without undermining product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as keep on top of it.
To request or place an order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 181 cm³ |
Type of filling | Semi-automatic oil filling during operation Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Electrical level detection only with ST6 sensor with reed contact, sensor holder included in the scope of the delivery. Sensor not included in scope of delivery, sensor installation prepared. The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation at a maximum operating pressure of 10 bar. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |