We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001277
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001277, reach FAMAGA, the world's central producer of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each client. We admire everyone, who worked with us - so, our regular consumers obtain the most favorable purchase forms and discounts on the industrial equipment market. Now, there are more than 4500 such consumers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Honduras, Tunisia, The Gambia, France, Paraguay, Ireland, Cape Verde, Dominican Republic, Jordan, Angola, Zimbabwe, Switzerland, Lithuania, East Timor, Guyana, Malawi, Mozambique, Sierra Leone, Namibia, Ghana, United Arab Emirates, Iran, Syria, Niger, Suriname, Kazakhstan, Yemen, Mauritius, Australia, Mauritania, Morocco, Kuwait, Hungary, Philippines, Georgia, Botswana, Vietnam, Serbia, Uruguay, Latvia, Dominica, Albania, Eswatini, Togo, Burkina Faso. A well-shaped logistics system and a partnership network help us to dispatch our products anywhere in the globe promptly without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |