We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019865
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412019865, catch up with FAMAGA, the world's key distributor of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and private attention to each user. We esteem everyone, who worked with us - therefore, our regular clients accept the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Comoros, Ireland, Dominica, Iran, Lesotho, Guyana, Russia, United Arab Emirates, Saudi Arabia, Netherlands, Tonga, Eritrea, Pakistan, South Korea, Syria, Guinea, Madagascar, South Sudan, Thailand, The Bahamas, Algeria, Samoa, Kiribati, The Gambia, Australia, Vietnam, Indonesia, Latvia, Croatia, Zambia, Panama, Finland, El Salvador, Jordan, Botswana, Norway, Luxembourg, Swaziland, Belarus, Czech Republic, Zimbabwe, Kyrgyzstan. A well-elaborated logistics system and a partnership network guide us to ship our products anywhere in the globe on-time without undermining product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |