We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822494103
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822494103, catch up with FAMAGA, the world's primary supplier of industrialized equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each user. We praise everyone, who liased with us - thus, our regular purchasers bring in the most flexible purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4500 such customers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Ghana, Chile, Equatorial Guinea, Sweden, Bahamas, Ecuador, Antigua and Barbuda, Ukraine, The Bahamas, Uzbekistan, United Arab Emirates, Gambia, Moldova, Libya, Algeria, Eritrea, Turkey, Jordan, Suriname, Azerbaijan, Grenada, Argentina, Luxembourg, Malta, Dominica, Macedonia, Thailand, Senegal, Denmark, Botswana, Kenya, Namibia, Philippines, Brazil, Djibouti, Zambia, New Zealand, Kyrgyzstan, Afghanistan, Tunisia, Mexico. A well-developed logistics link and a partnership network guide us to ship our units anywhere in the globe quickly without disreputing product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |