We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001398
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001398, connect FAMAGA, the world's primary retailer of machine made equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each purchaser. We esteem everyone, who liased with us - so, our regular buyers accept the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Kuwait, Seychelles, Guinea-Bissau, Algeria, Guinea, Jamaica, Qatar, Luxembourg, Belize, El Salvador, Kiribati, Russia, Burkina Faso, Indonesia, Oman, Turkmenistan, Sweden, Malaysia, Equatorial Guinea, Georgia, The Bahamas, Belarus, Greece, United Arab Emirates, Iraq, Serbia, Dominica, Suriname, Togo, Slovakia, Estonia, Mauritania, Eswatini, South Korea, Mongolia, United States, Mauritius, Latvia, Turkey, Cyprus, Senegal. A well-built logistics connection and a partnership network cheer us to dispatch our elements anywhere in the globe on-time without damaging product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |