D2A-01 AirCom Pneumatic

The operating pressure is converted into a proportional, electrical signal by a ceramics stainless steel pressure transducer. After amplification the signal is monitored as an analogue voltage or current signal.

Media: compressed air, natural gases or liquids

Supply_voltage: 12-33 V DC residual ripple 5%, with reverse voltage protection, max. current consumption 4 mA

Electrical_connector: plug M12x1, 4-pin, with coupling socket

Protection_class: IP67 according to DIN EN60529

Output_signal:
4-20 mA max. power consumption 260 mW
0-10 V max. power consumption 50 mW

Repeatability: < 0,2% v.E
Long-term_stability: < 0,25% v.E

Temperature_sensitivity: < 0,2% v.E
Vibration_resistance: 20 g at 15-2000 Hz

Ambient_temperature: from - 30 °C to 85 °C

Media_temperature: from - 40 °C to 125 °C

Shock_resistance: 100 g (11 ms)

Body: Stainless steel 316L, mat. no. 1.4404
O-Ring: FKM, optionally EPDM
Coupling_socket: Polyarylamid 50% GF UL 94 V-0
Measuring_cell: Stainless steel (bar areas) ceramics AL2O3 (mbar/absolute pressure areas)