DB26-04F AirCom Pneumatic

The back pressure regulator is a high-precison piston-operated regulator and protect pneumatic devices
against overpressure. If the pressure exceeds the setpoint, the pressure valve exhausts to the
atmosphere until the pressure level is below the setpoint. It is advisable to select the pressure range as
near as possible to the maximum setpoint.

Media:
compressed air, non-corrosive gases or liquids

Overpressure:
690 bar, optionally 1034 bar

Design proof pressure:
150 % maximum rated

Adjustment:
by knob

Leakage:
bubble-tight

Cleaning:
according to CGA4.1 and ASTM G93

Accuracy:
± 1% of pressure range

Gauge port:
not available

Mounting position:
any

Temperature range:
-40 °C to 80 °C / -40 °F to 176 °F, optionally high-temperature version up to 200 °C / 392 °F

Body: stainless steel 316
O-Rings: NBR/Buna-N, opt. Urethane or FKM
Seal: CTFE
Inner valve: stainless steel 300
Valve seat: Teflon up to pressure range 103 bar, CTFE down to pressure range 172 bar