We are not the manufacturer, authorised distributor or authorised representative of the SENECA brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
SENECA
Country
Italy
Name
Z-4RTD2
Category
Input modules
Type
Input module
Description
4-CH RTD input module / RS485 ModBUS RTU 6 ways isolation, @14bit
Stock availability:
Expected within 5 days
Z-4RTD2 is a device designed to convert signals from platinum or nickel resistance temperature detectors (RTD) such as PT100, PT1000, PT500, Ni100, with 2, 3 or 4 wires. The device is compatible with power supplies ranging from 10 to 40 VDC or 19 to 28 VAC.
The Z-4RTD2 features a 4-channel input for RTD sensors, and can provide a resolution of either 14 bits or 13 bits depending on the input range. The device can be programmed via software EASY Setup, Z-NET4 or through DIP-switches. It also has a microUSB connector located on the front panel for easy connection.
The device is well-insulated with a 1.5 kVac 6-way insulation that separates each input channel, power supply, and communication. This ensures safety and reduces the risk of electrical interference and noise.
POWER SUPPLY | 10..40 Vdc / 19..28 Vac |
POWER CONSUMPTION | 0,7 W |
ISOLATION | 1,5 kVac (6-way) |
STATUS INDICATORS | Power supply Error Dati transfer Data reception |
OPERATING TEMPERATURE | -20..+70°C (-20..+65°C UL) |
STORAGE TEMPERATURE | -20..+85°C |
RESOLUTION | 14 bit |
ACCURACY CLASS | 0,05 |
STABILITY | 0,04% |
LINEARITY | 0.025 % |
THERMAL DRIFT | < 50 ppm/K |
CONNECTIONS | Removable 4-way screw terminals, max. cross-section 1.5mm, pitch 3.5mm Micro USB on the front Rear connector IDC10 for DIN rail IEC EN 60715 |
MOUNTING | For 35 mm DIN 46277 rail |
DATA STORAGE | EEPROM for configuration parameters, retention time 10 years |
INTERFACES | RS485 2 wires Micro USB |
SPEED | Up to 115.200 bps |
PROTOCOLS | ModBUS RTU slave |
COMMUNICATION TIME | < 10 ms (@38.400 bps) |
MAX DISTANCE | Up to 1.200 m |
CONNECTIVITY | Max 32 nodes |
PROGRAMMING | Plug&play configuration (EASY SETUP) DIP switch System software (Z-NET4) Android app (EASY SETUP APP) |
PROGRAMMABLE PARAMETERS | Eight-level programmable filter for reading stabilization; 50 Hz or 60 Hz rejection; Floating-point, inverse floating-point, 16-bit fixed-point, tenths of a degree, tenths/hundredths of an ohm measurement; acquisition speed; reset value in the event of fault or freezing last reading; three-wire resistance compensation on mean value |
NUMBER OF INPUT CHANNELS | 4 |
TYPE OF INPUT CHANNELS | RTD with 2,3 or 4 wires cabling PT100, EN 60751/A2 (ITS-90), -200..+650°C PT500, EN 60751/A2 (ITS-90), -200..+750°C PT1000, EN 60751/A2 (ITS-90), -200..+210°C NI100, EN 60751/A2 (ITS-90), -60..+250°C |
HUMIDITY | 30..90% non-condensing |
PROTECTION DEGREE | IP20 |
WEIGHT | 140 g |
DIMENSION | 17.5x100x112 mm |
HOUSING | PA6 black color |
CERTIFICATIONS | CE, UL |
NORMS | EN 61000-6-4, EN 61000-6-2, EN 61010-1 |