We are not the manufacturer, authorised distributor or authorised representative of the Pulsotronic brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pulsotronic
Country
Germany
Name
KJ4-M18MB100-ANU-V2
Part number
8317140965
Category
Inductive Sensors
Type
Inductive sensor
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Product Description | inductive sensor analogue |
| Name | KJ4-M18MB100-ANU-V2 |
| Order number | 08317140965 |
| Matchcode | 9914-0965 |
| Switching distance | from 1 mm to 4 mm |
| Mounting | shielded |
| Switch type | analog |
| Signal Type | Analog Voltage |
| Connection | connector M12 |
| Connection diagramm | |
| Dimension (in mm) | fine-pitch thread M18 x 100 |
| Technical Specification | |
| Special features | Output Voltage 1 ... 9 Volt |
| Operating voltage | 18 - 30 VDC |
| Max. ripple | ≤ 10 % |
| No load current | ≤ 10 mA |
| Switching frequency | 100 Hz |
| Operating temperature | -25 ° C to 70 ° C |
| Temperature drift | +/- 8 % |
| Repeat accuracy | ≤ 1 % |
| Linearity | ≤ 3% |
| Analog output | Pulso_has1 |
| Time delay | 300 ms |
| Resolution | 2,67 V / mm |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-7:2004-06 |
| Housing material | Brass, nickel plated |
| Material active face | PCB |
| Rated operating current at 40° C | < 10 mA |
| Rated operating voltage | |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Contact holder | PA 6 |
| Nominal operating voltage | 24 V DC |
| Termination | Connector M12 4pin |
| internal Load | <= 500 Ohm |
| FIT / MTTF acc. to SIEMENS 29500 | 112,02 / 1019y |
| Errors and omissions exceptet |
