We are not the manufacturer, authorised distributor or authorised representative of the Pulsotronic brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pulsotronic
Country
Germany
Name
KW360-D42KN7-ANI
Part number
8330001140
Category
Encoders (Angle sensors)
Type
Angle sensor
Stock availability:
On request
If you are questing Pulsotronic KW360-D42KN7-ANI 8330001140, connect FAMAGA, the world's dominant producer of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of items and personalseparate attention to each user. We admire everyone, who worked with us - therefore, our regular customers obtain the most acceptable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such customers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Bahrain, Cape Verde, Peru, Guyana, Papua New Guinea, Angola, Czech Republic, East Timor, Austria, Slovenia, Latvia, Lebanon, Seychelles, Georgia, Zambia, Luxembourg, Malawi, Haiti, The Gambia, Suriname, Mauritius, Japan, Monaco, Malaysia, Finland, Libya, Kuwait, Swaziland, Egypt, Liechtenstein, Thailand, Benin, Estonia, Samoa, Costa Rica, Panama, Kiribati, Qatar, Comoros, Madagascar, Bolivia, Jamaica, North Korea. A well-developed logistics series and a partnership network help us to dispatch our units anywhere in the planet immediately without disreputing product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this number is amounting every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To consult or order, get in touch with us or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Product Description | angle sensor |
Name | KW360-D42KN7-ANI |
Order number | 08330001140 |
Switching distance | 6 mm |
Mounting | non shielded |
Switch type | analog current |
Connection | Cable 2m |
Connection diagramm | |
Dimension (in mm) | D 42 x 7 |
Technical Specification | |
Special features | Supply with Target-Magnet NdFeB 55/100 42x7 |
Operating voltage | 10 - 30 V DC |
Max. ripple | ≤ 10 % |
Voltage drop | 1 V |
Max. load current | 35 mA |
No load current | ≤ 15 mA |
Operating temperature | -40 ° C to 85 ° C |
Temperature drift | +/- 0,5 % |
Linearity | ± 1,5 % (bei Ta = 25°C) |
Analog output | Pulso_has1 |
Time delay | 15 ms |
Resolution | 12 Bit DAC über den gesamten Winkelbereich |
Inclination angle | 360° |
Output current | 4 ... 20 mA |
Short-circuit proof | yes |
Overload protection | yes |
Reverse voltage protection | yes |
Protection category | IP67 |
EMC-level | DIN EN 60947-5-2:2008 |
Housing material | PA 6.6 |
Number of terminals | 3 |
Cable length | 2000 mm |
Utilisation category | DC 13 |
Cable material | PUR |
Cable cross | 3x0.34 |
Errors and omissions exceptet |