We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NMB1,5-8GM50-E2-FE-V1
Part number
904825
Type
Inductive sensor
Description
Inductive sensor NMB1,5-8GM50-E2-FE-V1
Stock availability:
On request
If you are looking for Pepperl+Fuchs NMB1,5-8GM50-E2-FE-V1 904825, call FAMAGA, the world's key provider of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each consumer. We value everyone, who worked with us - therefore, our regular clients obtain the most attractive purchase forms and discounts on the industrial equipment market. Today, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Syria, Palestine, San Marino, Guatemala, Lesotho, Latvia, Japan, Burkina Faso, Nicaragua, Panama, Mauritania, Mexico, Estonia, Turkey, Tanzania, Pakistan, Andorra, Kuwait, Guinea, Seychelles, Costa Rica, Comoros, Equatorial Guinea, Finland, Moldova, Guyana, Iraq, Switzerland, The Bahamas, Angola, Slovakia, Luxembourg, Ireland, Tajikistan, Brunei, Nepal, Malaysia, Indonesia, Belarus, Uruguay, China, Central African Republic, Poland, Benin, Samoa, Mali. A well-built logistics chains and a partnership network guide us to conduct our goods anywhere in the globe promptly without undermining product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as to stay on the top.
To consult or book, call us by phone or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | |
---|---|
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 1.5 mm |
Installation | flush |
Output polarity | DC |
Assured operating distance | 0 ... 1.215 mm |
Actuating element | Ferrous targets |
Reduction factor rAl | 0 |
Reduction factor rCu | 0 |
Reduction factor r304 | 0.4 - 0.7 |
Reduction factor rSt37 | 1 |
Nominal ratings | |
Operating voltage | 10 ... 30 V DC |
Switching frequency | 80 Hz |
Hysteresis | 5 ... 15 typ. 10 % |
Reverse polarity protection | yes |
Short-circuit protection | yes |
Voltage drop | &le, 2 V |
Operating current | &le, 100 mA |
Current consumption | &le, 15 mA |
Off-state current | &le, 10 µ,A |
Indicators/operating means | |
Operation indicator | LED red: output |
Standard conformity | |
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated &le,36 V |
Ambient conditions | |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Mechanical specifications | |
Connection type | Connector M12 x 1 , 4-pin |
Housing material | Stainless steel 1.4305 / AISI 303 |
Sensing face | Stainless steel 1.4305 / AISI 303 |
Housing diameter | 8 mm |
Degree of protection | IP67 |