We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
UC4000-L2-E6-V15
Part number
277774
Type
Ultrasonic sensor
Description
Ultrasonic sensor UC4000-L2-E6-V15
Stock availability:
On request
If you are inspecting Pepperl+Fuchs UC4000-L2-E6-V15 277774, get in touch with FAMAGA, the world's dominant producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and personalseparate attention to each consumer. We esteem everyone, who conspired with us - thus, our regular customers obtain the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such customers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, France, Bosnia and Herzegovina, Andorra, Jordan, Bulgaria, Cambodia, Macedonia, Monaco, Norway, Zimbabwe, Ghana, Fiji, Gambia, Guinea, Ecuador, Nicaragua, Cameroon, Liberia, Cape Verde, North Korea, Kiribati, Argentina, The Gambia, Niger, Estonia, Slovakia, Georgia, Azerbaijan, Ukraine, Uruguay, Montenegro, Bangladesh, Nigeria, Burundi, Sierra Leone, Tonga, Brazil, Antigua and Barbuda, Senegal, Kyrgyzstan, South Korea, Paraguay, Iran. A well-developed logistics bond and a partnership network assist us to deliver our goods anywhere in the planet quickly without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To consult or order, phone us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Product Description |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 200 ... 4000 mm | |
Adjustment range | 240 ... 4000 mm | |
Dead band | 0 ... 200 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 85 kHz | |
Response delay | minimum : 110 ms factory setting: 280 ms | |
Indicators/operating means | ||
LED green | Operating display | |
LED yellow 1 | switching state switch output 1 | |
LED yellow 2 | switching state switch output 2 | |
LED red | error | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
No-load supply current | &le, 50 mA | |
Interface | ||
Interface type | Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit | |
Input/Output | ||
Input/output type | 1 synchronization connection, bidirectional | |
0 Level | 0 ... 1 V | |
1 Level | 4 V ... UB | |
Input impedance | > 12 k&Omega, | |
Output rated operating current | < 12 mA | |
Pulse length | 0.5 ... 300 ms (level 1) | |
Pulse interval | &ge, 62.5 ms (level 0) | |
Synchronization frequency | ||
Common mode operation | &le, 16 Hz | |
Multiplex operation | &le, 17 Hz / n , n = number of sensors , n &le, 10 (factory setting: n = 5 ) | |
Output | ||
Output type | 2 switch outputs PNP, NO/NC, programmable | |
Rated operating current | 200 mA , short-circuit/overload protected | |
Voltage drop | &le, 2 V | |
Repeat accuracy | &le, 0.1 % of full-scale value | |
Switching frequency | &le, 2.8 Hz | |
Range hysteresis | programmable , preset to 1 mm | |
Temperature influence | < 1.5 % of full-scale value | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 5-pin | |
Degree of protection | IP67 | |
Material | ||
Housing | PA-GF35 | |
Transducer | epoxy resin/hollow glass sphere mixture, polyurethane foam | |
Mass | 120 g | |
Factory settings | ||
Output 1 | near switch point: 240 mm far switch point: 4000 mm output function: Window mode output behavior: NO contact | |
Output 2 | near switch point: 500 mm far switch point: 2000 mm output function: Window mode output behavior: NO contact | |
Beam width | wide | |
Evaluation procedure | averaging (MxN) M = 5 N = 2 | |
General information | ||
Supplementary information | Switch settings of the external programming adapter: output load: pull-down output logic: inv |