We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NRN15-18GS40-E2-V1
Part number
264617
Type
Inductive sensor
Description
Inductive sensor NRN15-18GS40-E2-V1
Stock availability:
On request
If you are inspecting Pepperl+Fuchs NRN15-18GS40-E2-V1 264617, catch up with FAMAGA, the world's principle distributor of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of products and individual attention to each consumer. We understand everyone, who cooperated with us - so, our regular clients accept the most flexible purchase conditions and discounts on the industrial equipment market. Now, there are more than 4500 such clients, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Tonga, Belize, Eswatini, South Sudan, Kazakhstan, France, Armenia, Belarus, Nigeria, Hungary, Sudan, Cameroon, Qatar, Liberia, The Bahamas, North Korea, Liechtenstein, Ukraine, Argentina, Nepal, Senegal, Iceland, Finland, Indonesia, Sierra Leone, Mauritania, Moldova, Thailand, Laos, China, Brazil, Bosnia and Herzegovina, Montenegro, Latvia, Bangladesh, Cape Verde, Uganda, Seychelles, Slovakia, Chile, Paraguay, Suriname. A advanced logistics bond and a partnership network allow us to deliver our products anywhere in the earth as soon as possible without disreputing product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as to stay on the top.
To inquire or place an order, contact us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 15 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 12.15 mm | |
Reduction factor rAl | 1 | |
Reduction factor rCu | 1 | |
Reduction factor r304 | 1 | |
Reduction factor rSt37 | 1 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 0 ... 800 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Rated insulation voltage | 60 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.1 µ,A at 25 °C | |
No-load supply current | &le, 14 mA | |
Time delay before availability | max. 15 ms | |
Constant magnetic field | 200 mT | |
Alternating magnetic field | 200 mT | |
Switching state indicator | Multihole-LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1393 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
Protection class | II | |
Rated insulation voltage | 60 V | |
Rated impulse withstand voltage | 800 V | |
UL approval | cULus Listed, General Purpose Class 2 power source | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 4-pin | |
Housing material | Stainless steel 1.4305 / AISI 303 | |
Sensing face | PBT | |
Degree of protection | IP67 | |
Mass | 36 g | |
General information | ||
Scope of delivery | 2 self locking nuts in scope of delivery |