We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBB20-U1-B3B
Part number
226315
Type
Inductive sensor
Description
Inductive sensor NBB20-U1-B3B
Stock availability:
On request
If you are seeking Pepperl+Fuchs NBB20-U1-B3B 226315, communicate with FAMAGA, the world's principle provider of streamlined equipment. Our company has existed for more than ten years - these are years of experience, which are represented in the quality of outputs and personalseparate attention to each user. We understand everyone, who cooperated with us - hence, our regular purchasers get the most favorable purchase conditions and discounts on the industrial equipment market. At present, there are more than 4500 such customers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Congo, Andorra, Norway, Chad, Tunisia, Uzbekistan, Peru, Mongolia, Monaco, Nigeria, China, Burma, North Korea, Azerbaijan, Seychelles, United States, Sudan, Suriname, Macedonia, Burundi, Luxembourg, Malta, Slovakia, East Timor, New Zealand, United Arab Emirates, Tonga, Libya, Tajikistan, Russia, Iran, Haiti, Zambia, Bulgaria, Lithuania, Sweden, Chile, Hungary, Uganda, Namibia, India, Albania, Kazakhstan, Vietnam, Yemen, Turkey, Bangladesh, Denmark, Argentina. A well-developed logistics series and a partnership network allow us to conduct our elements anywhere in the earth with no delay without damaging product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as keep on top of it.
To request or order, call us by phone or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open/closed (NO/NC) programmable | |
Output type | AS-Interface | |
Rated operating distance | 20 mm | |
Installation | flush | |
Assured operating distance | 0 ... 16.2 mm | |
Actual operating distance | 18 ... 22 mm typ. 20 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.35 | |
Reduction factor r304 | 0.85 | |
Slave type | A/B slave | |
AS-Interface specification | V3.0 | |
Required master specification | &ge, V2.1 | |
Output type | 2-wire | |
Nominal ratings | ||
Operating voltage | 26.5 ... 31.9 V via AS-i bus system | |
Switching frequency | 0 ... 150 Hz | |
Hysteresis | 1 ... 15 typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
No-load supply current | &le, 25 mA | |
Time delay before availability | &le, 1000 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Error indicator | LED, red | |
Functional safety related parameters | ||
MTTFd | 1330 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal with epoxy powder coating | |
Sensing face | PBT | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K |