We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBN40-U1L-E2
Part number
214009
Type
Inductive sensor
Description
Stock availability:
On request
If you are questing Pepperl+Fuchs NBN40-U1L-E2 214009, catch up with FAMAGA, the world's the best retailer of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are outlined in the quality of goods and particular attention to each buyer. We esteem everyone, who engaged with us - so, our regular purchasers bring in the most desirable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Iran, Israel, Angola, Central African Republic, Japan, Gambia, Guyana, Fiji, Eritrea, Slovenia, Iceland, Nepal, Turkey, Finland, Zambia, United Arab Emirates, Comoros, Belarus, Monaco, Netherlands, Samoa, Jamaica, Mali, Serbia, Tajikistan, Haiti, Liechtenstein, Ireland, Switzerland, Kiribati, Seychelles, Ukraine, Malaysia, Togo, Poland, Cyprus, Syria, Kuwait, Suriname, The Gambia, Estonia, Paraguay. A well-developed logistics network and a partnership network help us to ship our goods anywhere in the globe with no delay without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as to stay on the top.
To ask a question or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 40 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 32.4 mm | |
Actual operating distance | 36 ... 44 mm | |
Reduction factor rAl | 0.39 | |
Reduction factor rCu | 0.37 | |
Reduction factor r304 | 0.75 | |
Reduction factor rBrass | 0.45 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 0 ... 100 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.01 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 120 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1310 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
Protection class | II | |
Rated insulation voltage | 230 V | |
Rated impulse withstand voltage | 2.5 kV | |
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal | |
Sensing face | PA | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K | |
Mass | 225 g | |
Note | Tightening torque: 1.8 Nm (housing) |