We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBB20-U10-A2
Part number
203037
Type
Inductive sensor
Description
Inductive sensor NBB20-U10-A2
Stock availability:
On request
If you are seeking Pepperl+Fuchs NBB20-U10-A2 203037, call FAMAGA, the world's central supplier of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and individual attention to each client. We esteem everyone, who engaged with us - so, our regular customers receive the most convenient purchase forms and discounts on the factory-made equipment market. Now, there are more than 4000 such clients, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Austria, Thailand, Brazil, Bhutan, Malaysia, Turkmenistan, Nicaragua, Portugal, Andorra, Myanmar, Croatia, Burundi, Kazakhstan, The Bahamas, Suriname, Niger, Ghana, Ecuador, Uzbekistan, Ireland, Monaco, Gambia, Moldova, Namibia, Haiti, New Zealand, Philippines, Iraq, Uganda, Bosnia and Herzegovina, Lithuania, Denmark, Togo, China, Tanzania, Mongolia, Bulgaria, Nigeria, Malta, The Gambia, Tonga, Iceland, Libya, Tunisia. A well-developed logistics network and a partnership network cheer us to deliver our products anywhere in the world immediately without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as to stay on the top.
To inquire or order, phone us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | complementary | |
Output type | PNP | |
Rated operating distance | 20 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 16.2 mm | |
Reduction factor rAl | 0.33 | |
Reduction factor rCu | 0.31 | |
Reduction factor r304 | 0.74 | |
Reduction factor rBrass | 0.41 | |
Output type | 4-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 0 ... 440 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 80 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1289 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal with epoxy powder coating | |
Sensing face | PA | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K | |
Mass | 225 g | |
Note | Tightening torque: 1.8 Nm (housing) |