We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
UC500-30GM-IUEP-IO-V15
Part number
191238
Type
Ultrasonic sensor
Description
Ultrasonic sensor UC500-30GM-IUEP-IO-V15
Stock availability:
On request
If you are inspecting Pepperl+Fuchs UC500-30GM-IUEP-IO-V15 191238, connect FAMAGA, the world's primary vendor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of products and personalseparate attention to each consumer. We esteem everyone, who worked with us - therefore, our regular buyers procure the most beneficial purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4500 such customers, and we constantly compose new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the earth Germany, United Kingdom, Syria, Czech Republic, Cape Verde, Papua New Guinea, United Arab Emirates, Singapore, Iceland, Samoa, Jordan, Mauritania, Israel, Cyprus, Burkina Faso, South Sudan, Angola, Macedonia, Fiji, Peru, Bulgaria, Malta, Malaysia, Brunei, Swaziland, Senegal, Liechtenstein, Russia, Indonesia, Philippines, Costa Rica, El Salvador, Egypt, Estonia, Mali, Sweden, Slovakia, United States, Mexico, Jamaica, Latvia, Guatemala, Moldova, Poland, Suriname, Switzerland, Seychelles. A well-developed logistics bond and a partnership network assist us to conduct our units anywhere in the earth promptly without undermining product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, phone us or write to the online chat on our site. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Product Description |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 30 ... 500 mm | |
Adjustment range | 50 ... 500 mm | |
Dead band | 0 ... 30 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 380 kHz | |
Response delay | minimum : 25 ms factory setting: 45 ms | |
Indicators/operating means | ||
LED green | solid: Power on flashing: Standby mode or IO link communication | |
LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected | |
LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected | |
LED red | solid red: Error red, flashing: program function, object not detected | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC , ripple 10 %SS 15 ... 30 V voltage output | |
No-load supply current | &le, 60 mA | |
Power consumption | &le, 1 W | |
Interface | ||
Interface type | IO-Link | |
Protocol | IO-Link V1.0 | |
Transfer rate | Acyclical: typical 240 Bit/s | |
Cycle time | min. 13.2 ms | |
Process data width | 16 bit | |
SIO mode support | yes | |
Input/Output | ||
Input/output type | 1 synchronization connection, bidirectional | |
0 Level | 0 ... 1 V | |
1 Level | 4 V ... UB | |
Input impedance | > 12 k&Omega, | |
Output rated operating current | < 12 mA | |
Pulse length | 0.5 ... 300 ms (level 1) | |
Pulse interval | &ge, 14 ms (level 0) | |
Synchronization frequency | ||
Common mode operation | &le, 70 Hz | |
Multiplex operation | &le, 90 Hz / n , n = number of sensors , n &le, 10 (factory setting: n = 5 ) | |
Output | ||
Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA ... 20 mA or voltage output 0 V ... 10 V configurable | |
Rated operating current | 200 mA , short-circuit/overload protected | |
Voltage drop | &le, 2.5 V | |
Resolution | current output: evaluation range [mm]/3200 but &ge,0.05 mm voltage output: evaluation range [mm]/4000 but &ge,0.05 mm | |
Deviation of the characteristic curve | &le, 0.2 % of full-scale value | |
Repeat accuracy | &le, 0.1 % of full-scale value | |
Switching frequency | &le, 11 Hz | |
Range hysteresis | 1 % of the adjusted operating range (default settings), programmable | |
Load impedance | current output: &le, 300 Ohm voltage output: &ge, 1000 Ohm | |
Temperature influence | &le, 1.5 % from full-scale value (with temperature compensation) &le, 0.2 %/K (without temperature compensation) | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 5-pin | |
Degree of protection | IP67 | |
Material | ||
Housing | Stainless steel 1.4305 / AISI 303 TPU Polyamides | |
Transducer | epoxy resin/hollow glass sphere mixture, polyurethane foam | |
Mass | 66 g |