We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NJ30+U1+N
Part number
106685
Type
Inductive sensor
Description
Inductive sensor NJ30+U1+N
Stock availability:
On request
If you are inspecting Pepperl+Fuchs NJ30+U1+N 106685, catch up with FAMAGA, the world's key supplier of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each consumer. We esteem everyone, who worked with us - thus, our regular clients obtain the most beneficial purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Seychelles, Botswana, Eritrea, Grenada, Peru, Argentina, Dominica, Burkina Faso, Turkmenistan, East Timor, Philippines, Equatorial Guinea, Singapore, Pakistan, Egypt, Mozambique, Georgia, Bulgaria, Suriname, Laos, Ireland, Indonesia, Croatia, South Sudan, Nigeria, El Salvador, Qatar, Afghanistan, Swaziland, Estonia, Vietnam, Greece, Costa Rica, Ghana, Brunei, Burundi, Mauritania, Macedonia, Panama, Togo, United States, Cape Verde, Australia. A well-elaborated logistics system and a partnership network guide us to conduct our elements anywhere in the world on-time without undermining product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that users choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To request or place an order, contact us or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally closed (NC) | |
Output type | NAMUR | |
Rated operating distance | 30 mm | |
Installation | non-flush | |
Assured operating distance | 0 ... 24.3 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.3 | |
Reduction factor r304 | 0.85 | |
Output type | 2-wire | |
Nominal ratings | ||
Nominal voltage | 8 V | |
Switching frequency | 0 ... 150 Hz | |
Current consumption | ||
Measuring plate not detected | min. 3 mA | |
Measuring plate detected | &le, 1 mA | |
Functional safety related parameters | ||
MTTFd | 3630 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | |
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
FM approval | ||
Control drawing | 116-0165 | |
UL approval | ||
Ordinary Location | E87056 | |
Hazardous Location | E501628 | |
Control drawing | 116-0451 | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PBT | |
Sensing face | PBT | |
Degree of protection | IP68 | |
Note | Tightening torque: 1.8 Nm (housing) | |
Equipment protection level Ga | ||
CE marking | [*PD-Z02585A*] | |
ATEX marking | II 1G Ex ia IIC T6&hellip,T1 Ga The Ex-related marking can also be printed on the enclosed label. | |
Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
Appropriate type | NJ 30+U.+N... | |
Effective internal capacitance | max. 160 nF , a cable length of 10 m is considered. | |
Effective internal inductance | max. 130 µ,H , a cable length of 10 m is considered. | |
Ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1. | |
Equipment protection level Gb | ||
CE marking | [*PD-Z02585A*] | |
ATEX marking | II 1G Ex ia IIC T6&hellip,T1 Ga The Ex-related marking can also be printed on the enclosed label. | |
Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
Appropriate type | NJ 30+U.+N... | |
Effective internal capacitance | max. 160 nF , a cable length of 10 m is considered. | |
Effective internal inductance | max. 130 µ,H , a cable length of 10 m is considered. | |
Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. | |
Equipment protection level Da | ||
CE marking | [*PD-Z02585A*] | |
ATEX marking | II 1D Ex ia IIIC T135°C Da The Ex-related marking can also be printed on the enclosed label. | |
Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
Appropriate type | NJ 30+U.+N... | |
Effective internal capacitance | max. 160 nF , a cable length of 10 m is considered. | |
Effective internal inductance | max. 130 µ,H , a cable length of 10 m is considered. | |
General information | ||
Use in the hazardous area | see instruction manuals | |
Category | 1G, 2G, 1D |