We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NJ1,5-8GM-N-V1
Part number
106364
Type
Inductive sensor
Description
Inductive sensor NJ1,5-8GM-N-V1
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Pepperl+Fuchs NJ1,5-8GM-N-V1 106364, get in touch with FAMAGA, the world's leading distributor of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of items and particular attention to each consumer. We respect everyone, who cooperated with us - so, our regular purchasers obtain the most flexible purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Georgia, Philippines, Syria, Antigua and Barbuda, Denmark, Malawi, Botswana, Cape Verde, Congo, Eritrea, Chad, Ghana, Lebanon, Uganda, Kenya, Jordan, Argentina, Netherlands, Kyrgyzstan, Montenegro, Macedonia, Zambia, Burundi, Comoros, The Gambia, Uzbekistan, Kiribati, Azerbaijan, Croatia, Paraguay, Egypt, Turkey, Estonia, Norway, Mali, Iraq, Bulgaria, Thailand, Tunisia, Rwanda, Nigeria, Ukraine, Luxembourg, Hungary, Sudan, Lithuania, Equatorial Guinea. A well-shaped logistics series and a partnership network let us to ship our goods anywhere in the world immediately without damaging product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as keep on top of it.
To ask a question or place an order, phone us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 1.5 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 1.215 mm | |
| Actual operating distance | 1.35 ... 1.65 mm typ. | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 k&Omega,) | |
| Switching frequency | 0 ... 5000 Hz | |
| Hysteresis | 1 ... 10 typ. 5 % | |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | &le, 1 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 012/2011 | |
| FM approval | ||
| Control drawing | 116-0165 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le,36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 2G Ex ia IIC T6&hellip,T1 Gb The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
| Appropriate type | NJ1,5-8GM-N... | |
| Effective internal capacitance | max. 30 nF , a cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µ,H , a cable length of 10 m is considered. | |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. | |
| Equipment protection level Da | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 1D Ex ia IIIC T135°C Da The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
| Appropriate type | NJ1,5-8GM-N... | |
| Effective internal capacitance | max. 30 µ,F A cable length of 10 m is considered. | |
| Effective internal inductance | max. 50 µ,H A cable length of 10 m is considered. | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 2G |
