We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
CG.CO.M16.BN.C.16.K01
Part number
291370
Type
Explosion Protection
Description
Stock availability:
On request
If you are seeking Pepperl+Fuchs CG.CO.M16.BN.C.16.K01 291370, reach FAMAGA, the world's chief vendor of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are represented in the quality of outcomes and special attention to each user. We admire everyone, who liased with us - so, our regular buyers accept the most acceptable purchase conditions and discounts on the factory-made equipment market. At present, there are more than 3500 such clients, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Azerbaijan, Italy, Greece, Cape Verde, Eswatini, Armenia, Togo, Ghana, China, Kenya, Ireland, Honduras, Philippines, Jordan, Burundi, Fiji, Bhutan, Vietnam, Seychelles, The Bahamas, South Sudan, Paraguay, Yemen, Ukraine, Cyprus, Pakistan, Afghanistan, Moldova, Botswana, Serbia, Malaysia, Angola, Russia, Mauritania, Hungary, Indonesia, Latvia, Kuwait, Mauritius, Tajikistan. A well-developed logistics connection and a partnership network assist us to conduct our products anywhere in the earth with no delay without discrediting product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this amount is rising every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as stay in control.
To inquire or make a request, phone us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Mechanical specifications | ||
---|---|---|
Cable type | non-armored cables in flexible conduit | |
Clamping range (D) | 4 ... 12 mm | |
Seal combination S1 | 9 ... 12 mm | |
Seal combination S1+S2 | 6 ... 9 mm | |
Seal combination S1+S2+S3 | 4 ... 6 mm | |
Thread type | metric ISO pitch 1.5 mm | |
Thread size (TD) | M16 | |
Degree of protection | IP66 / IP68 | |
Material | ||
Finish | inherent color silver | |
Cable gland | brass, nickel-plated | |
Washer gasket | aramid fibers bonded with NBR | |
O-Ring | chloroprene | |
Seal insert | chloroprene | |
Mass | ||
Individual component | approx. 70 g | |
Packing unit | approx. 95 g | |
Dimensions | ||
Width across corners (D2) | 26.5 mm | |
Diameter thru-hole (DT) | 16 ... 16.2 mm | |
Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
Flexible conduit, inner diameter (FC2) | 15 mm | |
Flexible conduit, corrugation size (FC3) | 4.5 mm | |
Length outside enclosure (H) | 43 mm | |
Width across flats (SW1) | 22 mm | |
Width across flats (SW2) | 24 mm | |
Width across flats (SW3) | 24 mm | |
Thread length (TL) | 16 mm | |
Total length (L) | 72 mm | |
Tightening torque | ||
Nut torque at enclosure (SW1) | 4 Nm | |
Nut torque 2 with seal S1 (SW2) | 15 Nm | |
Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
Ambient conditions | ||
Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | IMQ 14 ATEX 012X | |
Marking | II 2 GD Ex db IIC Gb Ex eb IIC Gb Ex tb IIIC Db | |
International approvals | ||
IECEx approval | IECEx IMQ 14.0004X | |
EAC approval | TC RU C-TR.GB05.B.00918 | |
Conformity | ||
Degree of protection | EN 60529 | |
General information | ||
Delivery quantity | 1 | |
Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |