We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
FB9206D3
Part number
276379
Type
Power supply
Description
Stock availability:
On request
Slots | ||
---|---|---|
Occupied slots | 2 | |
Supply | ||
Connection | wired to Ex e terminals via backplane | |
Maximum safe voltage Um | 60 V DC (SELV/PELV) common mode | |
Input voltage range | 18 ... 32 V DC (SELV/PELV) | |
Power dissipation | 4.7 W at 100 % load 3.8 W at 50 % load | |
Power consumption | max. 44 W | |
Inrush current | 6 A (30 ms) 15 A (20 µ,s) | |
Output | ||
Voltage | 5.4 V DC +/- 5% , 12 V DC + 4/- 2% | |
Power | P5V &le, 5.4 W, P12V &le, 39 W - P5V | |
Galvanic isolation | ||
Power supply/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff | |
Indicators/settings | ||
LED indication | LED green: OFF in case of loss of 24V or 12V or 5V | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Galvanic isolation | EN 61010-1:2010 | |
Degree of protection | IEC 60529 | |
Environmental test | EN 60068-2-14 | |
Shock resistance | EN 60068-2-27 | |
Vibration resistance | EN 60068-2-6 | |
Damaging gas | EN 60068-2-42 | |
Relative humidity | EN 60068-2-56 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Relative humidity | 95 % non-condensing | |
Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
Vibration resistance | frequency range 10 ... 150 Hz, transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g, 10 cycles frequency range 5 ... 100 Hz, transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g, 90 minutes at each resonance | |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 | |
Mechanical specifications | ||
Degree of protection | IP20 (module) , a separate housing is required acc. to the system description | |
Mass | approx. 970 g | |
Dimensions | 57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch) | |
Data for application in connection with hazardous areas | ||
EU-Type Examination Certificate | ||
Marking | II 2G Ex db eb q IIC Gb | |
Wait time | wait time before removing the device: 7 min For further information see instruction manual. | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015 | |
International approvals | ||
ATEX approval | Presafe 19 ATEX 14059U | |
IECEx approval | ||
IECEx certificate | IECEx PRE 19.0014U | |
IECEx marking | Ex db eb q IIC Gb | |
General information | ||
System information | The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. | |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |