select
  • Brand
  • Product

+49 (451) 703 64 997

cart
Eng Worldwide
select
  • Brand
  • Product

+49 (451) 703 64 997

cart
Eng Worldwide
Module S1SD-1AI-1R Pepperl+Fuchs 305245
Module S1SD-1AI-1R Pepperl+Fuchs 305245

We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

S1SD-1AI-1R 305245 Pepperl+Fuchs Module

Manufacturer

Pepperl+Fuchs

Country

Germany

Name

S1SD-1AI-1R

Part number

305245

Type

Module

Description

  • 1-channel signal conditioner
  • 24 V DC supply
  • Input bipolar current and voltage sources
  • Relay contact output
  • Accuracy 0.1 %
  • Restart inhibit
  • Configurable by DIP switches and software
  • Connection via screw terminals

Stock availability:

On request

287.43 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications S1SD-1AI-1R 305245

This signal conditioner provides the galvanic isolation between field circuits and control circuits. The device supplies 2-wire and 3-wire transmitters The device has an input for bipolar current and voltage sources. The device actuates a relay contact output when it reaches the adjusted limit value. The device is easily configured by the use of DIP switches or software. The device has an adjustable on delay, an off delay, or an one-shot function for the relay contact output. The teach-in function can be used to teach in the limit value. The device can be powered via terminals or Power Bus.

Features S1SD-1AI-1R 305245

General specifications
Signal typeAnalog input
Supply
ConnectionPower Bus or terminals 1-, 2+
Rated voltage16.8 ... 31.2 V DC
Power dissipation0.6 W
Power consumption0.8 W
Interface
Programming interfaceprogramming socket
Input
Connection sidefield side
Transmission rangelinearity range: unipolar -1 ... 110 % bipolar -110 ... 110 %
Input I
Connectionterminals 5, 6, 7-
Input signal0/4 ... 20 mA , 0/2 ... 10 mA , ± 10 mA, ± 20 mA , max. 50 mA
Input resistance&le, 25 &Omega,
Input II
Connectionterminals 7-, 8+
Input signal0/1 ... 5 V , 0/2 ... 10 V , ± 5 V , ± 10 V , max. 30 V
Input resistance> 1 M&Omega,
Input III
Connectionterminals 5+, 6-
Input signal0/4 ... 20 mA
Available voltage16 V at 20 mA
Open circuit voltage/short-circuit current&le, 22 V / 30 mA
Input IV
Connectionterminals 5, 7
Input typereset restart inhibit
Output
Connection sidecontrol side
Connectionterminals 3, 4:
Outputsignal, relay
Contact loading253 V AC/2 A/cos &phi, > 0.7, 126.5 V AC/2 A/cos &phi, > 0.7, 30 V DC/2 A resistive load
Minimum switch current2 mA / 24 V DC
Energized/De-energized delay&le, 20 ms / &le, 20 ms
Mechanical life107 switching cycles
Collective error messagePower Bus
Transfer characteristics
Accuracymax. 0.1 % of full-scale value
Influence of ambient temperature< 100 ppm/K of full-scale value
Galvanic isolation
Output/power supplysafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuitssafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Display elementsLEDs
Control elementsDIP-switch keys
Configurationvia DIP switches via keys via software
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Conformity
Degree of protectionIEC 60529:2001
Protection against electrical shockEN 61010-1:2010
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Damaging gasdesigned for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals
Core cross-section0.5 ... 2.5 mm2 (20 ... 14 AWG)
Massapprox. 70 g
Dimensions6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Optional accessoriespower feed module S1SD-2PF adapter with USB interface S-ADP-USB Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP
Invite to the tender
Our Manager will contact you soon.
  • Enter your name
  • Enter your contact phone number.
  • Enter your email address
  • This field can not be empty
  • This field can not be empty

The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent

Send a request

We will contact with you and answer to all your questions

  • Enter your name
  • Enter your contact phone number.
  • Enter your email address
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue By ordering several items from us at once, you will significantly save on delivery!
Brands catalogue Search
Something went wrong.
Something seems to have gone wrong. Try again later.
Close the message
We use cookies. For more information, please refer to our data protection policy.
I understand