We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBN40-U1L-A2-M
Part number
214115
Type
Inductive sensor
Description
Stock availability:
On request
If you are looking for Pepperl+Fuchs NBN40-U1L-A2-M 214115, call FAMAGA, the world's central supplier of machine made equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and special attention to each purchaser. We esteem everyone, who collaborated with us - so, our regular buyers receive the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, United Arab Emirates, Lesotho, The Bahamas, Guatemala, Poland, Eswatini, Burkina Faso, Albania, Australia, The Gambia, Estonia, Croatia, Latvia, Ireland, Syria, Armenia, Bhutan, Oman, Denmark, Ukraine, Philippines, Mauritius, Luxembourg, Kyrgyzstan, Mauritania, Tunisia, China, Ecuador, Liberia, Fiji, Finland, Tajikistan, Angola, Cyprus, Kenya, Panama, Algeria, Samoa, Chile, Togo, Namibia, Georgia, Zimbabwe, Qatar, Greece, Indonesia, Sierra Leone. A well-elaborated logistics connection and a partnership network assist us to dispatch our products anywhere in the planet quickly without undermining product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is growing every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as to stay on the top.
To ask a question or order, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | complementary | |
Output type | PNP | |
Rated operating distance | 40 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 32.4 mm | |
Actual operating distance | 36 ... 44 mm | |
Reduction factor rAl | 0.39 | |
Reduction factor rCu | 0.37 | |
Reduction factor r304 | 0.75 | |
Reduction factor rBrass | 0.45 | |
Output type | 4-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 60 V DC | |
Switching frequency | 0 ... 100 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.01 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 120 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1030 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
Protection class | II | |
Rated insulation voltage | 230 V | |
Rated impulse withstand voltage | 2.5 kV | |
UL approval | cULus Listed, General Purpose | |
E1 Type approval | 10R-047189 | |
Ambient conditions | ||
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal | |
Sensing face | PA | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K | |
Mass | 225 g | |
Note | Tightening torque: 1.8 Nm (housing) |