We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBN40-U1L-A0
Part number
214019
Type
Inductive sensor
Description
Stock availability:
On request
If you are seeking Pepperl+Fuchs NBN40-U1L-A0 214019, catch up with FAMAGA, the world's principle producer of mechanized equipment. Our company has existed for more than ten years - these are years of experience, which are outlined in the quality of products and particular attention to each client. We esteem everyone, who engaged with us - therefore, our regular purchasers receive the most beneficial purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Switzerland, Congo, Mauritania, Seychelles, Norway, Poland, Samoa, Uruguay, Jamaica, Serbia, Qatar, Indonesia, Egypt, Mauritius, Iceland, Malawi, Romania, Tanzania, Kiribati, Malaysia, Haiti, Peru, Libya, Burkina Faso, Malta, Estonia, Russia, Pakistan, Uzbekistan, Nicaragua, United Arab Emirates, Macedonia, Vietnam, Sierra Leone, Botswana, Israel, China, Moldova, Philippines, Burundi, Panama, Namibia, Yemen, Georgia. A well-shaped logistics bond and a partnership network help us to conduct our elements anywhere in the planet on-time without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as stay in control.
To ask a question or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | complementary | |
Output type | NPN | |
Rated operating distance | 40 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 32.4 mm | |
Actual operating distance | 36 ... 44 mm | |
Reduction factor rAl | 0.39 | |
Reduction factor rCu | 0.37 | |
Reduction factor r304 | 0.75 | |
Reduction factor rBrass | 0.45 | |
Output type | 4-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 0 ... 100 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.01 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 120 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1320 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
Protection class | II | |
Rated insulation voltage | 230 V | |
Rated impulse withstand voltage | 2.5 kV | |
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
Core cross-section | up to 2.5 mm2 | |
Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
Housing material | PA/metal | |
Sensing face | PA | |
Housing base | plastic | |
Degree of protection | IP68 / IP69K | |
Mass | 225 g | |
Note | Tightening torque: 1.8 Nm (housing) |