We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
UC4000-L2M-E7-T-2M
Part number
299135
Type
Burner control unit
Description
Stock availability:
On request
If you are pursuing Pepperl+Fuchs UC4000-L2M-E7-T-2M 299135, call FAMAGA, the world's top company of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of products and private attention to each client. We esteem everyone, who cooperated with us - so, our regular clients pick up the most beneficial purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Vietnam, Bahamas, Zambia, Philippines, Montenegro, Senegal, Turkmenistan, Mauritania, Pakistan, Syria, Israel, Croatia, Russia, Gambia, Brunei, East Timor, Netherlands, Antigua and Barbuda, Kenya, Malaysia, Grenada, Benin, Thailand, Yemen, Iceland, Poland, Mexico, Mongolia, United States, Seychelles, Chile, Mozambique, Haiti, Angola, Sweden, Albania, Burkina Faso, Luxembourg, South Korea, Togo, Bolivia, Botswana, Swaziland, United Arab Emirates, Brazil. A well-built logistics system and a partnership network cheer us to ship our products anywhere in the earth quickly without compromising product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this bulk is rising every day. We are glad that users choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as to stay on the top.
To inquire or order, phone us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Product Description |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 200 ... 4000 mm | |
Adjustment range | 240 ... 4000 mm | |
Dead band | 0 ... 200 mm | |
Standard target plate | 100 mm x 100 mm | |
Transducer frequency | approx. 85 kHz | |
Response delay | minimum : 110 ms factory setting: 280 ms | |
Indicators/operating means | ||
LED green | Operating display | |
LED yellow 1 | switching state switch output 1 | |
LED yellow 2 | switching state switch output 2 | |
LED red | error | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
No-load supply current | &le, 50 mA | |
Interface | ||
Interface type | Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit | |
Input/Output | ||
Input/output type | 1 synchronization connection, bidirectional | |
0 Level | 0 ... 1 V | |
1 Level | 4 V ... UB | |
Input impedance | > 12 k&Omega, | |
Output rated operating current | < 12 mA | |
Pulse length | 0.5 ... 300 ms (level 1) | |
Pulse interval | &ge, 62.5 ms (level 0) | |
Synchronization frequency | ||
Common mode operation | &le, 16 Hz | |
Multiplex operation | &le, 17 Hz / n , n = number of sensors , n &le, 10 (factory setting: n = 5 ) | |
Output | ||
Output type | 2 switch outputs NPN, NO/NC, programmable | |
Rated operating current | 200 mA , short-circuit/overload protected | |
Voltage drop | &le, 2 V | |
Repeat accuracy | &le, 0.1 % of full-scale value | |
Switching frequency | &le, 2.8 Hz | |
Range hysteresis | programmable , preset to 1 mm | |
Temperature influence | < 1.5 % of full-scale value | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 | |
Approvals and certificates | ||
EAC conformity | TR CU 020/2011 | |
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | cable , 5-pin | |
Degree of protection | IP67 | |
Material | ||
Housing | PA-GF35 | |
Cable | PUR | |
Transducer | epoxy resin/hollow glass sphere mixture, polyurethane foam | |
Cable | ||
Sheath diameter | 7.25 mm | |
Bending radius | > 37.3 mm , fixed > 74.7 mm , moving | |
Core cross-section | 5 x 0.82 mm2 | |
Length | 2 m | |
Mass | 355 g | |
Factory settings | ||
Output 1 | near switch point: 240 mm far switch point: 4000 mm Output mode: Window mode output behavior: NO contact | |
Output 2 | near switch point: 500 mm far switch point: 2000 mm Output mode: Window mode output behavior: NO contact | |
Beam width | wide | |
Evaluation procedure | averaging (MxN) M = 5 N = 2 | |
General information | ||
Supplementary information | Switch settings of the external programming adapter: output load: pull-up output logic: inv |