We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
UC250-F77-IU-IO-2M
Part number
266632-100003
Type
Burner control unit
Description
Stock availability:
On request
If you are questing Pepperl+Fuchs UC250-F77-IU-IO-2M 266632-100003, reach FAMAGA, the world's top retailer of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of goods and personalseparate attention to each consumer. We admire everyone, who collaborated with us - so, our regular purchasers obtain the most acceptable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Togo, Colombia, Mali, Qatar, Turkey, Iran, Ecuador, South Korea, United States, Costa Rica, Czech Republic, Cyprus, The Gambia, Liechtenstein, Kuwait, Haiti, The Bahamas, Malta, Kiribati, Panama, Chad, Guatemala, New Zealand, Nepal, Zambia, Comoros, Madagascar, Lithuania, Egypt, Gambia, Afghanistan, Rwanda, Mexico, Nicaragua, Jamaica, East Timor, Pakistan, Mozambique, Albania, Seychelles, Cape Verde, China, Ireland, Morocco, Bolivia, Chile. A well-developed logistics network and a partnership network let us to send our goods anywhere in the planet with no delay without damaging product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Product Description |
---|
Single head system |
General specifications | ||
---|---|---|
Sensing range | 20 ... 250 mm | |
Adjustment range | 25 ... 250 mm | |
Dead band | 0 ... 20 mm | |
Standard target plate | 10 mm x 10 mm | |
Transducer frequency | approx. 400 kHz | |
Response delay | minimum : 8 ms factory setting: 29 ms | |
Sensor cycle time | &ge, 8 ms (factory setting) , programmable to 60 s | |
Memory | ||
Non-volatile memory | EEPROM | |
Write cycles | 300000 | |
Indicators/operating means | ||
LED green | solid: power on flashing: standby mode or IO-Link communication | |
LED yellow | solid: object in evaluation range flashing: programming of the limits, object detected | |
LED red | solid: fault flashing: programming limits, object not detected | |
Electrical specifications | ||
Operating voltage | 18 ... 30 V DC , ripple 10 %SS | |
No-load supply current | &le, 50 mA | |
Power consumption | &le, 500 mW | |
Time delay before availability | &le, 300 ms | |
Interface | ||
Interface type | IO-Link (available after activation via programming button until next reset) | |
Input/Output | ||
Input/output type | 1 synchronization connection, bidirectional | |
0 Level | 0 ... 1 V | |
1 Level | 2.5 V ... UB | |
Input impedance | > 22 k&Omega, | |
Output rated operating current | current source < 2.5 mA | |
Pulse length | &ge, 1 ms with external control, low active | |
Synchronization frequency | ||
Common mode operation | &le, 141 Hz | |
Multiplex operation | &le, 141 Hz / n , n = number of sensors , n &le, 10 | |
Output | ||
Output type | 1 analog output 0 (4) ... 20 mA or 1 analog output 0 ... 10 V | |
Resolution | current output: evaluation range [mm]/3200 but &ge, 0.35 mm voltage output: evaluation range [mm]/4000 but &ge, 0.35 mm | |
Deviation of the characteristic curve | &le, ± 1 % of full-scale value | |
Repeat accuracy | &le, ± 0.1 % of full-scale value | |
Load impedance | current output: &le, 500 Ohm voltage output: &ge, 1000 Ohm | |
Temperature influence | &le, ± 0.75 % of the end value (with temperature compensation) from 10 minutes after switching on the sensor , 0,17 %/K (without temperature compensation) | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003 | |
Approvals and certificates | ||
UL approval | cULus Listed, Class 2 Power Source | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | current output -25 ... 60 °C (-13 ... 140 °F) voltage output -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | cable PUR , 2 m | |
Core cross-section | 4 x 0.19 mm2 | |
Degree of protection | IP67 | |
Material | ||
Housing | Polycarbonate | |
Transducer | epoxy resin/hollow glass sphere mixture, polyurethane foam | |
Installation position | any position | |
Mass | 51 g | |
Tightening torque, fastening screws | max. 0.2 Nm | |
Factory settings | ||
Output | near limit: 25 mm far limit: 250 mm Output mode: rising ramp output type: 4 ... 20 mA | |
Beam width | wide |