We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NMB3-8GM50-E0-V3
Part number
912294
Type
Inductive sensor
Description
Inductive sensor NMB3-8GM50-E0-V3
Stock availability:
On request
If you are questing Pepperl+Fuchs NMB3-8GM50-E0-V3 912294, connect FAMAGA, the world's principle company of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of items and special attention to each orderer. We value everyone, who engaged with us - therefore, our regular purchasers pick up the most flexible purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Ghana, Latvia, Serbia, Guinea-Bissau, Honduras, Belarus, Suriname, Kyrgyzstan, Romania, Malawi, Czech Republic, Zimbabwe, United States, Angola, Sudan, New Zealand, Oman, Benin, Nepal, Tonga, Vietnam, Cameroon, Syria, Bolivia, Poland, Mauritania, The Bahamas, Croatia, Comoros, Senegal, Nicaragua, Armenia, Afghanistan, Liechtenstein, Cyprus, East Timor, China, Togo, Madagascar, South Korea, Swaziland, Switzerland, Turkey, Finland, Mauritius. A well-elaborated logistics network and a partnership network assist us to ship our goods anywhere in the planet on-time without discrediting product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To request or book, contact us or write to the online chat on our site. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | |
---|---|
Switching function | Normally open (NO) |
Output type | NPN |
Rated operating distance | 3 mm |
Installation | flush |
Output polarity | DC |
Assured operating distance | 0 ... 2.43 mm |
Reduction factor rAl | 0.3 |
Reduction factor rCu | 0.2 |
Reduction factor r304 | 0.7 |
Nominal ratings | |
Operating voltage | 10 ... 30 V DC |
Switching frequency | 0 ... 360 Hz |
Hysteresis | 5 ... 15 typ. 10 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | &le, 2 V |
Operating current | 0 ... 100 mA |
Off-state current | 0 ... 10 µ,A typ. 0.1 µ,A at 25 °C |
No-load supply current | &le, 10 mA |
Switching state indicator | LED, red |
Standard conformity | |
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated &le,36 V |
Ambient conditions | |
Ambient temperature | -25 ... 75 °C (-13 ... 167 °F) |
Mechanical specifications | |
Connection type | Connector M8 x 1 , 3-pin |
Housing material | Stainless steel 1.4305 / AISI 303 |
Sensing face | Stainless steel 1.4305 / AISI 303 |
Housing diameter | 8 mm |
Degree of protection | IP67 |