We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NJ50-FP-E-P4-V1
Part number
092040
Type
Inductive sensor
Description
Inductive sensor NJ50-FP-E-P4-V1
Stock availability:
On request
If you are looking for Pepperl+Fuchs NJ50-FP-E-P4-V1 092040, contact FAMAGA, the world's foremost company of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each buyer. We praise everyone, who engaged with us - therefore, our regular consumers pick up the most favorable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, San Marino, Afghanistan, Croatia, Syria, Algeria, Panama, Eswatini, Congo, Oman, Iraq, Nepal, Belgium, Peru, Russia, Netherlands, Guyana, Kuwait, Turkmenistan, Argentina, Mauritania, Greece, Georgia, Burkina Faso, Costa Rica, Dominica, Togo, Botswana, Burundi, Tajikistan, El Salvador, China, Libya, Fiji, India, Ireland, Switzerland, Mozambique, South Korea, Antigua and Barbuda, Mauritius, Tonga, Belarus, Qatar, Indonesia, Armenia. A advanced logistics chains and a partnership network guide us to conduct our goods anywhere in the globe immediately without undermining product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | NPN | |
Rated operating distance | 50 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 40.5 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.3 | |
Reduction factor r304 | 0.85 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V | |
Switching frequency | 0 ... 100 Hz | |
Hysteresis | typ. 3 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 3 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA typ. 0.1 µ,A at 25 °C | |
No-load supply current | &le, 20 mA | |
Time delay before availability | &le, 30 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Standard conformity | ||
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Mechanical specifications | ||
Connection type | V1 connector (M12 x 1), 4-pin | |
Housing material | PBT/metal | |
Sensing face | PBT | |
Degree of protection | IP67 |