We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NJ4-12GM50-WS-20M
Part number
118786
Type
Inductive sensor
Description
Inductive sensor NJ4-12GM50-WS-20M
Stock availability:
On request
If you are pursuing Pepperl+Fuchs NJ4-12GM50-WS-20M 118786, connect FAMAGA, the world's key provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of goods and particular attention to each consumer. We cherish everyone, who worked with us - therefore, our regular clients get the most desirable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Portugal, Ecuador, Sri Lanka, Moldova, Japan, Chile, Belarus, Georgia, Jordan, Monaco, Grenada, Bulgaria, Laos, Ukraine, Estonia, Suriname, Sudan, Kuwait, Mali, Algeria, Eswatini, Malaysia, Czech Republic, Australia, Finland, Kiribati, Zambia, Paraguay, Liechtenstein, Iceland, Mexico, Central African Republic, Rwanda, Bosnia and Herzegovina, Iraq, Pakistan, Armenia, Guatemala, Equatorial Guinea, Niger, Andorra, Afghanistan. A well-shaped logistics bond and a partnership network cheer us to dispatch our items anywhere in the globe immediately without undermining product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | |
---|---|
Switching function | Normally open (NO) |
Output type | Two-wire |
Rated operating distance | 4 mm |
Installation | non-flush |
Output polarity | AC |
Assured operating distance | 0 ... 3.24 mm |
Reduction factor rAl | 0.4 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.7 |
Nominal ratings | |
Operating voltage | 20 ... 253 V |
Switching frequency | 0 ... 20 Hz |
Voltage drop | typ. 4 V at 15 ... 200 mA typ. 6.5 V at 5 mA |
Momentary current (20 ms, 0.1 Hz) | 0 ... 1200 mA |
Operating current | 5 ... 200 mA |
Off-state current | typ. 0.7 mA |
Switching state indicator | LED, yellow |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
Ambient conditions | |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Mechanical specifications | |
Connection type | cable PVC , 20 m |
Core cross-section | 0.34 mm2 |
Housing material | Stainless steel 1.4305 / AISI 303 |
Sensing face | PBT |
Housing diameter | 12 mm |
Degree of protection | IP67 |
Note | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V Safety fuse &le, 0.8 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |