We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NJ30+U4+N
Part number
106687
Type
Inductive sensor
Description
Inductive sensor NJ30+U4+N
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Pepperl+Fuchs NJ30+U4+N 106687, reach FAMAGA, the world's prime producer of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and special attention to each user. We admire everyone, who conspired with us - thus, our regular buyers accept the most acceptable purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Honduras, Philippines, Belgium, South Korea, Ecuador, Comoros, Paraguay, Denmark, Qatar, Belize, Guyana, Suriname, United States, Serbia, Greece, Algeria, Romania, Bangladesh, Mauritania, Liberia, China, Kenya, Indonesia, Mauritius, Brazil, Albania, Ireland, Yemen, Botswana, Turkey, Zimbabwe, Latvia, Cameroon, Slovakia, Samoa, Kyrgyzstan, Georgia, Mozambique, Togo, Thailand. A well-shaped logistics bond and a partnership network let us to send our elements anywhere in the world promptly without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are happy that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To get some advice or place an order, contact us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR | |
| Rated operating distance | 30 mm | |
| Installation | non-flush | |
| Assured operating distance | 0 ... 24.3 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 k&Omega,) | |
| Switching frequency | 0 ... 150 Hz | |
| Current consumption | ||
| Measuring plate not detected | min. 3 mA | |
| Measuring plate detected | &le, 1 mA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
| Approvals and certificates | ||
| FM approval | ||
| Control drawing | 116-0165 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le,36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % | |
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT/metal | |
| Sensing face | PBT | |
| Degree of protection | IP68 | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 2G Ex ia IIC T6&hellip,T1 Gb The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
| Appropriate type | NJ 30+U.+N... | |
| Effective internal capacitance | max. 160 nF , a cable length of 10 m is considered. | |
| Effective internal inductance | max. 130 µ,H , a cable length of 10 m is considered. | |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. | |
| Equipment protection level Da | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 1D Ex ia IIIC T135°C Da The Ex-related marking can also be printed on the enclosed label. | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection Intrinsic safety Use is restricted to the following stated conditions | |
| Appropriate type | NJ 30+U.+N... | |
| Effective internal capacitance | max. 160 µ,F A cable length of 10 m is considered. | |
| Effective internal inductance | max. 130 µ,H A cable length of 10 m is considered. | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 2G |
