We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBN40-L2-E2-V1-3G-3D
Part number
317344
Type
Inductive sensor
Description
Inductive sensor NBN40-L2-E2-V1-3G-3D
Stock availability:
On request
If you are inspecting Pepperl+Fuchs NBN40-L2-E2-V1-3G-3D 317344, connect FAMAGA, the world's major distributor of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and special attention to each buyer. We value everyone, who conspired with us - therefore, our regular consumers accept the most helpful purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Romania, Eritrea, Samoa, Grenada, Guyana, Hungary, Malta, Dominica, Guatemala, Jordan, India, Mauritius, Burkina Faso, Yemen, Saudi Arabia, Kyrgyzstan, Jamaica, Eswatini, Peru, Andorra, Mozambique, Israel, South Sudan, Bosnia and Herzegovina, Switzerland, Sudan, Nepal, Cyprus, Benin, Moldova, Bolivia, Paraguay, Comoros, Qatar, The Gambia, Djibouti, Madagascar, Nigeria, Costa Rica, Mauritania. A well-elaborated logistics chains and a partnership network assist us to send our goods anywhere in the world immediately without compromising product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally open (NO) | |
Output type | PNP | |
Rated operating distance | 40 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 32.4 mm | |
Actual operating distance | 36 ... 44 mm typ. 40 mm | |
Reduction factor rAl | 0.33 | |
Reduction factor rCu | 0.31 | |
Reduction factor r304 | 0.74 | |
Reduction factor rBrass | 0.38 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 0 ... 180 Hz | |
Hysteresis | typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | 0 ... 0.5 mA | |
No-load supply current | &le, 20 mA | |
Time delay before availability | 80 ms | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Functional safety related parameters | ||
MTTFd | 1057 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
Protection class | II | |
Rated insulation voltage | 253 V | |
Rated impulse withstand voltage | 4000 V | |
UL approval | cULus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M12 x 1 , 4-pin | |
Housing material | PA | |
Sensing face | PA | |
Degree of protection | IP69K | |
Cable | ||
Cable diameter | 3.3 mm ± 0.15 mm | |
Mass | 130 g | |
Data for application in connection with hazardous areas | ||
Equipment protection level | Gc (nA) , Dc | |
Equipment protection level Gc (nA) | ||
Type of protection | n | |
CE marking | [*PD-Z02586A*] | |
Certificates | ||
ATEX certificate | PF15CERT3754X | |
ATEX marking | II 3G Ex nA IIC T6 Gc | |
Standards | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
Possible characteristics | maximum operating voltage UBmax , maximum load current ILmax , minimum series resistance RV , maximum analog output voltage UAmax , maximum analog output current IAmax | |
Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at UBmax = 30 V , IL = 200 mA : 48 °C (118.4 °F) at UBmax = 30 V , IL = 100 mA : 50 °C (122 °F) at UBmax = 30 V , IL = 50 mA : 51 °C (123.8 °F) at UBmax = 30 V , IL = 25 mA : 52 °C (125.6 °F) | |
Equipment protection level Dc | ||
Type of protection | Protection by enclosure tc | |
CE marking | [*PD-Z02586A*] | |
Certificates | ||
ATEX certificate | PF15CERT3774X | |
ATEX marking | II 3D Ex tc IIIC T80°C Dc | |
Standards | EN 60079-0:2012+A11:2013 , EN 60079-31:2014 | |
Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at UBmax = 30 V , IL = 200 mA : 48 °C (118.4 °F) at UBmax = 30 V , IL = 100 mA : 50 °C (122 °F) at UBmax = 30 V , IL = 50 mA : 51 °C (123.8 °F) at UBmax = 30 V , IL = 25 mA : 52 °C (125.6 °F) | |
General information | ||
Use in the hazardous area | see instruction manuals |