Inductive sensor NBB20-U4-E0 Pepperl+Fuchs 203060
Inductive sensor NBB20-U4-E0 Pepperl+Fuchs 203060

We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

NBB20-U4-E0 203060 Pepperl+Fuchs Inductive sensor

Manufacturer

Pepperl+Fuchs

Country

Germany

Name

NBB20-U4-E0

Part number

203060

Type

Inductive sensor

Description

Inductive sensor NBB20-U4-E0

Stock availability:

On request

104.31 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications NBB20-U4-E0 203060

If you are looking for Pepperl+Fuchs NBB20-U4-E0 203060, contact FAMAGA, the world's chief distributor of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and private attention to each buyer. We esteem everyone, who conspired with us - therefore, our regular purchasers accept the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the planet . A well-built logistics chains and a partnership network assist us to dispatch our goods anywhere in the planet promptly without discrediting product quality.

A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of industrial equipment.

All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this number is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.

To request or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features NBB20-U4-E0 203060

General specifications
Switching functionNormally open (NO)
Output typeNPN
Rated operating distance20 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 16.2 mm
Actual operating distance18 ... 22 mm typ. 20 mm
Reduction factor rAl 0.33
Reduction factor rCu 0.31
Reduction factor r304 0.74
Reduction factor rBrass 0.41
Output type3-wire
Nominal ratings
Operating voltage10 ... 30 V DC
Switching frequency0 ... 440 Hz
Hysteresistyp. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage drop&le, 2 V
Operating current0 ... 200 mA
Off-state current0 ... 0.5 mA typ. 0.1 µ,A at 25 °C
No-load supply current&le, 20 mA
Time delay before availability80 ms
Operating voltage indicatorLED, green
Switching state indicatorLED, yellow
Functional safety related parameters
MTTFd1510 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated &le,36 V
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection typescrew terminals
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross-sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPA/metal with epoxy powder coating
Sensing facePA
Housing basemetal
Degree of protectionIP68 / IP69K
Mass225 g
NoteTightening torque: 1.8 Nm (housing)