We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Part number
304615-0062
Type
Inductive sensor
Description
Inductive sensor NBB2-8GM40-E3-V3
Stock availability:
On request
If you are questing Pepperl+Fuchs 304615-0062, make contact with FAMAGA, the world's foremost retailer of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each consumer. We respect everyone, who liased with us - therefore, our regular clients get the most flexible purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Iceland, Peru, The Gambia, Dominican Republic, Albania, Brazil, Colombia, Guinea, Cyprus, Syria, Turkey, Eritrea, Afghanistan, Seychelles, Luxembourg, Monaco, Tonga, United States, Montenegro, Morocco, Bulgaria, Samoa, Russia, Costa Rica, China, Macedonia, Kuwait, Ghana, Paraguay, Madagascar, Nicaragua, Serbia, Yemen, Estonia, Mongolia, Malaysia, Hungary, Jamaica, Tajikistan, Bolivia, Latvia, Nigeria, Haiti, Burkina Faso. A well-built logistics bond and a partnership network guide us to conduct our units anywhere in the planet immediately without compromising product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is amounting every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as stay in control.
To consult or order, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
General specifications | ||
---|---|---|
Switching function | Normally closed (NC) | |
Output type | PNP | |
Rated operating distance | 2 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 1.62 mm | |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.3 | |
Reduction factor r304 | 0.75 | |
Reduction factor rBrass | 0.45 | |
Output type | 3-wire | |
Nominal ratings | ||
Operating voltage | 5 ... 30 V | |
Switching frequency | 0 ... 6000 Hz | |
Hysteresis | typ. 5% | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | &le, 1.5 V | |
Operating current | 0 ... 100 mA | |
Off-state current | 0 ... 0.2 mA | |
No-load supply current | &le, 10 mA | |
Time delay before availability | &le, 100 ms | |
Switching state indicator | Multihole-LED, yellow | |
Functional safety related parameters | ||
MTTFd | 960 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
CCC approval | CCC approval / marking not required for products rated &le,36 V | |
Ambient conditions | ||
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug M8 x 1 , 3-pin | |
Housing material | brass, nickel-plated | |
Sensing face | LCP | |
Degree of protection | IP67 | |
General information | ||
Scope of delivery | 2 hex nuts included |