We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI MDZB40-35, call FAMAGA, the world's primary company of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of merchandises and special attention to each consumer. We respect everyone, who collaborated with us - hence, our regular consumers accept the most attractive purchase conditions and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Zambia, Samoa, Equatorial Guinea, Yemen, Gambia, Papua New Guinea, India, The Bahamas, Chad, Suriname, Brunei, Romania, Egypt, Morocco, Georgia, Eswatini, North Korea, Monaco, Guyana, United Arab Emirates, Libya, Sudan, Latvia, Austria, Kuwait, Costa Rica, Russia, Vietnam, Norway, Iraq, Poland, Jamaica, Albania, Namibia, Iran, Angola, Syria, Finland, United States, Malaysia, Djibouti. A well-built logistics series and a partnership network help us to send our goods anywhere in the globe promptly without disreputing product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as to stay on the top.
To ask a question or place an order, contact us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material: | Filler Added PTFE Layer |
Sintered Bronze Layer | |
Steel-backed Metal Layer (EN 1.0330 Equiv.: Tin Plating) | |
Allowable Temperature: -195 ~ 280�C |
Part Number | - | L |
MDZB8 | - | 5 |
Part Number | L | D | T | * Shaft Diameter | ||||||||||||||||||
Tolerance | Tolerance | |||||||||||||||||||||
Type | d | Ref. Dim. | Tolerance | |||||||||||||||||||
Straight Type MDZB | 3 | 3 | 4 | 5 | 6 | 5 | +0.047 +0.017 | 1.0 | 0 -0.025 | 3 | -0.025 -0.034 | |||||||||||
4 | 3 | 4 | 5 | 6 | 8 | 6 | +0.047 +0.017 | 1.0 | 0 -0.025 | 4 | -0.025 -0.037 | |||||||||||
5 | 3 | 4 | 5 | 6 | 8 | 7 | +0.055 +0.025 | 1.0 | 0 -0.025 | 5 | -0.025 -0.037 | |||||||||||
6 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 8 | +0.055 +0.025 | 1.0 | 0 -0.025 | 6 | -0.025 -0.037 | |||||||||
8 | 5 | 6 | 8 | 10 | 12 | 15 | 10 | +0.055 +0.025 | 1.0 | 0 -0.025 | 8 | -0.025 -0.040 | ||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 20 | 12 | +0.060 +0.030 | 1.0 | 0 -0.025 | 10 | -0.025 -0.040 | ||||||||||
12 | 6 | 8 | 10 | 12 | 15 | 20 | 14 | +0.060 +0.030 | 1.0 | 0 -0.025 | 12 | -0.025 -0.043 | ||||||||||
13 | 8 | 10 | 12 | 15 | 20 | 15 | +0.060 +0.030 | 1.0 | 0 -0.025 | 13 | -0.025 -0.043 | |||||||||||
15 | 8 | 10 | 12 | 15 | 20 | 25 | 17 | +0.065 +0.035 | 1.0 | 0 -0.025 | 15 | -0.025 -0.043 | ||||||||||
16 | 10 | 12 | 15 | 20 | 25 | 18 | +0.070 +0.035 | 1.0 | 0 -0.025 | 16 | -0.025 -0.043 | |||||||||||
18 | 10 | 12 | 15 | 20 | 25 | 30 | 20 | +0.075 +0.040 | 1.0 | 0 -0.025 | 18 | -0.025 -0.043 | ||||||||||
20 | 10 | 12 | 15 | 20 | 25 | 30 | 23 | +0.080 +0.045 | 1.5 | 0 -0.030 | 20 | -0.025 -0.046 | ||||||||||
22 | 10 | 12 | 15 | 20 | 25 | 30 | 25 | +0.080 +0.045 | 1.5 | 0 -0.030 | 22 | -0.025 -0.046 | ||||||||||
25 | 10 | 12 | 15 | 20 | 25 | 30 | 35 | 28 | +0.085 +0.050 | 1.5 | 0 -0.030 | 25 | -0.025 -0.046 | |||||||||
30 | 12 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 34 | +0.090 +0.050 | 2.0 | 0 -0.030 | 30 | -0.025 -0.046 | ||||||||
35 | 20 | 25 | 30 | 35 | 40 | 50 | 39 | +0.095 +0.055 | 2.0 | 0 -0.030 | 35 | -0.025 -0.050 | ||||||||||
40 | 12 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 44 | +0.095 +0.055 | 2.0 | 0 -0.030 | 40 | -0.025 -0.050 | ||||||||
50 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 55 | +0.105 +0.060 | 2.5 | 0 -0.030 | 50 | -0.025 -0.050 |
D | * Housing Dia. H7 | I.D. Tolerance after press fit (Reference Value) |
3~6 | + 0.012 0 | + 0.062 0 |
7~10 | + 0.015 0 | + 0.065 0 |
11~18 | + 0.018 0 | + 0.068 0 |
19~20 | + 0.021 0 | + 0.071 0 |
21~30 | + 0.081 0 | |
31~50 | + 0.025 0 | + 0.085 0 |
51~80 | + 0.030 0 | + 0.110 0 |