We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPSTA5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI SFPSTA5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1], catch up with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of outputs and individual attention to each purchaser. We understand everyone, who cooperated with us - hence, our regular customers bring in the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Myanmar, Kazakhstan, Lesotho, Ghana, Bahamas, Senegal, Belgium, Bulgaria, Dominican Republic, Madagascar, North Korea, Libya, Austria, Tonga, Belarus, Czech Republic, Norway, Denmark, Benin, Kuwait, Iran, Monaco, Greece, Chad, Qatar, Niger, Lithuania, Sierra Leone, Moldova, Russia, Hungary, El Salvador, Namibia, Bosnia and Herzegovina, Burundi, Equatorial Guinea, Kyrgyzstan, Tunisia, Kiribati, Tanzania, Thailand, Antigua and Barbuda, Syria, Mongolia, Serbia. A well-developed logistics chains and a partnership network let us to send our products anywhere in the globe immediately without damaging product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is amounting every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To get some advice or book, contact us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | ?6 | -0.004 -0.012 | ?4 | ?5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
?8 | -0.005 -0.014 | ?6 | ?7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | ?7 | ?8 | ?9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | ?8 | ?9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | ?5 | -0.004 -0.012 | 3.00~5.00 | 10 | ?5 | 2 | 1.2 | M2 | - | ?3 |
?6 | 4.00~6.00 | 1.5 | M3 | ?147 | ?5 | ||||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 15 | ?6 | 3 | 1.8 | M5 | ?676 | ?8 | ||
?8T | M4 | ?333 | ?6 | ||||||||
10 | ?7.00~10.00 | ?8 | 2.2 | M5 | ?676 | ?8 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 2.5 | ||||||||
13 | ?8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | ?5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | ?3 |
?6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | ?147 | ?5 | ||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | ?676 | ?8 | ||
?8T | M4 | ?333 | ?6 | ||||||||
10 | ?7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | ?676 | ?8 | ||||
10T | 8(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | ?8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |