We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JBHUNP6-15
Description
Bushings for Locating Pins/Flanged/Thin Wall
Stock availability:
On request
If you are pursuing MISUMI JBHUNP6-15, catch up with FAMAGA, the world's principle vendor of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each purchaser. We appreciate everyone, who cooperated with us - hence, our regular consumers accept the most convenient purchase terms and discounts on the factory-made equipment market. Now, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Botswana, Zimbabwe, Peru, Moldova, Malaysia, Bhutan, Comoros, Switzerland, East Timor, Nepal, South Sudan, Nicaragua, Latvia, Mexico, Singapore, Bolivia, Sweden, Eritrea, Netherlands, Suriname, The Bahamas, Estonia, Central African Republic, Croatia, Morocco, Czech Republic, Mauritania, Pakistan, Jordan, Brunei, India, Madagascar, Haiti, Thailand, Luxembourg, Israel, Guatemala, Philippines, Djibouti, Tajikistan. A well-elaborated logistics network and a partnership network let us to ship our goods anywhere in the globe on-time without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |
p6 | m6 | |||
EN 1.3505 or EN 1.2510 Equiv. | - | 58HRC~ | JBHUP | JBHU |
EN 1.3505 or EN 1.2510 Equiv. | Electroless Nickel Plating | 58HRC~ | JBHUNP | JBHUN |
EN 1.4125 Equiv. | - | 50HRC~ | JBHUCP | JBHUC |
Part Number | - | L |
JBH5 | - | 8 |
JBHUN12 | - | 12 |
Part Number | L Selection | Thickness (N) | R | H | T | D | D Tolerance | Unit Price | |||||||||||||||
Type | d | D Tolerance | p6 | m6 | JBHU JBHUP | JBHUN JBHUNP | JBHUC JBHUCP | ||||||||||||||||
No Surface Treatment | Electroless Nickel Plating | ||||||||||||||||||||||
(p6) JBHUP JBHUNP JBHUCP (m6) JBHU JBHUN JBHUC | 3 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 6 | 8 | 10 | 12 | 1 | 0.5 | 9 | 2.5 | 5 | +0.020 +0.012 | +0.012 +0.004 | |||||||
4 | +0.012 +0.004 | +0.012 0 | 6 | 8 | 10 | 12 | 15 | 16 | 10 | 3 | 6 | ||||||||||||
5 | 6 | 8 | 10 | 12 | *15 | *16 | 20 | 11 | 7 | +0.024 +0.015 | +0.015 +0.006 | ||||||||||||
6 | 6 | 8 | 10 | 12 | *15 | 16 | 20 | 12 | 8 | ||||||||||||||
8 | +0.014 +0.005 | G6 | +0.014 +0.005 | 6 | 8 | 10 | 12 | *15 | 16 | 20 | 14 | 4 | 10 | ||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 1.5 | 17 | 13 | +0.029 +0.018 | +0.018 +0.007 | |||||||||||
12 | +0.017 +0.006 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | *20 | 19 | 15 | |||||||||||||
13 | 10 | 12 | 15 | 16 | 20 | 2 | 1 | 21 | 5 | 17 | - | - | |||||||||||
15 | 12 | 15 | 16 | 20 | 24 | 19 | +0.035 +0.022 | +0.021 +0.008 | |||||||||||||||
16 | 12 | 15 | 16 | 20 | *25 | 2.5 | 2 | 26 | 21 | ||||||||||||||
20 | +0.020 +0.007 | +0.020 +0.007 | 12 | 15 | 16 | 20 | 25 | 3 | 31 | 6 | 26 | ||||||||||||
25 | 20 | 25 | 36 | 31 | +0.042 +0.026 | +0.025 +0.009 |