We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPSCC16-P[6-14/0.01]-W[3.01-13.99/0.01]-L[5-30/1]
Description
Slot Pins for Inspection Jigs/Oval Straight Type
Stock availability:
On request
If you are questing MISUMI KJPSCC16-P[6-14/0.01]-W[3.01-13.99/0.01]-L[5-30/1], reach FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of merchandises and individual attention to each purchaser. We value everyone, who collaborated with us - hence, our regular clients pick up the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Laos, Venezuela, Bahrain, Iceland, Nicaragua, The Bahamas, Ukraine, Japan, Panama, Colombia, Liechtenstein, Iran, Malaysia, Russia, Finland, Angola, Cyprus, Senegal, Kuwait, Switzerland, Suriname, Rwanda, Costa Rica, Croatia, Djibouti, Philippines, Australia, Samoa, Peru, Zambia, Benin, Comoros, Montenegro, Latvia, India, East Timor, Nigeria, Belarus, Cape Verde, Brunei, Dominica, Paraguay, Jamaica, Antigua and Barbuda. A well-built logistics connection and a partnership network cheer us to ship our products anywhere in the globe on-time without disreputing product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is growing every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Straight | Stepped Straight | |
Type | Type | |||
P0 -0.02 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPSC | KJPDC | KJPGDC |
EN 1.1191 Equiv. | 45HRC~ | KJPSHC | KJPDHC | KJPGDHC |
EN 1.4301 Equiv. | - | KJPSCS | KJPDCS | - |
1 EN 1.4125 Equiv. | 45~50HRC | KJPSCC | - | KJPGDCC |
Part Number (TYPE, D) | - | P | - | W | - | S | - | F | - | L | - | B |
KJPDC16 | - | P10.97 | - | W8.47 | - | S6.00 | - | F2.0 | - | L5 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | M | ||||||
Straight | Stepped Straight | D | P | W | S Stepped Type only | F(FS/2) Stepped Type only | L | B Stepped Type only | ||
(P0 -0.02) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | ||||||||
(EN 1.1191 Equiv.) KJPSC (EN 1.1191 Equiv. Hardened) KJPSHC (EN 1.4301 Equiv.) KJPSCS (EN 1.4125 Equiv.) KJPSCC | (EN 1.1191 Equiv.) KJPDC (EN 1.1191 Equiv. Hardened) KJPDHC (EN 1.4301 Equiv.) KJPDCS | (EN 1.1191 Equiv.) KJPGDC (EN 1.1191 Equiv. Hardened) KJPGDHC (EN 1.4125 Equiv.) KJPGDCC | 8 | 4.00~6.00 | P>W>S (W3.01) | 3.00~5.00 | 0.3~2.5 | Straight 5~30*1 Stepped Straight 5~20 | 5~20 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.5 | M5 | ||||||
12 | 4.00~10.00 | 3.00~9.00 | 0.5~4.5 | M5 | ||||||
16 | 6.00~14.00 | 4.00~13.00 | 0.5~6.5 | M5 | ||||||
20 | 10.00~18.00 | 6.00~17.00 | 1.0~8.5 | M5 | ||||||
25 | 14.00~22.00 | 8.00~21.00 | 2.0~10.5 | M5 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.5 | M5 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.5 | M5 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~12.0 | M5 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.5 | M5 |