We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDHC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-20/1]-B[5-20/1]
Description
Slot Pins for Inspection Jigs/Oval Straight Type
Stock availability:
On request
If you are seeking MISUMI KJPGDHC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-20/1]-B[5-20/1], call FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are portrayed in the quality of spare parts and private attention to each purchaser. We cherish everyone, who collaborated with us - therefore, our regular consumers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Mauritania, Belgium, Lebanon, Guatemala, North Korea, Cameroon, Samoa, Iceland, Malaysia, Zimbabwe, India, Denmark, Hungary, Tanzania, Nigeria, Mauritius, Iraq, Zambia, Oman, Yemen, Uzbekistan, Kiribati, Mali, Macedonia, Tajikistan, Israel, Slovakia, Belarus, Czech Republic, Australia, Syria, Central African Republic, Benin, Antigua and Barbuda, Ireland, Montenegro, Argentina, Sudan, Tunisia, Morocco, Ukraine, Switzerland. A well-shaped logistics bond and a partnership network cheer us to send our elements anywhere in the earth with no delay without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as keep on top of it.
To request or make a request, contact us or write a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Hardness | Straight | Stepped Straight | |
Type | Type | |||
P0 -0.02 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPSC | KJPDC | KJPGDC |
EN 1.1191 Equiv. | 45HRC~ | KJPSHC | KJPDHC | KJPGDHC |
EN 1.4301 Equiv. | - | KJPSCS | KJPDCS | - |
1 EN 1.4125 Equiv. | 45~50HRC | KJPSCC | - | KJPGDCC |
Part Number (TYPE, D) | - | P | - | W | - | S | - | F | - | L | - | B |
KJPDC16 | - | P10.97 | - | W8.47 | - | S6.00 | - | F2.0 | - | L5 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | M | ||||||
Straight | Stepped Straight | D | P | W | S Stepped Type only | F(FS/2) Stepped Type only | L | B Stepped Type only | ||
(P0 -0.02) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | ||||||||
(EN 1.1191 Equiv.) KJPSC (EN 1.1191 Equiv. Hardened) KJPSHC (EN 1.4301 Equiv.) KJPSCS (EN 1.4125 Equiv.) KJPSCC | (EN 1.1191 Equiv.) KJPDC (EN 1.1191 Equiv. Hardened) KJPDHC (EN 1.4301 Equiv.) KJPDCS | (EN 1.1191 Equiv.) KJPGDC (EN 1.1191 Equiv. Hardened) KJPGDHC (EN 1.4125 Equiv.) KJPGDCC | 8 | 4.00~6.00 | P>W>S (W3.01) | 3.00~5.00 | 0.3~2.5 | Straight 5~30*1 Stepped Straight 5~20 | 5~20 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.5 | M5 | ||||||
12 | 4.00~10.00 | 3.00~9.00 | 0.5~4.5 | M5 | ||||||
16 | 6.00~14.00 | 4.00~13.00 | 0.5~6.5 | M5 | ||||||
20 | 10.00~18.00 | 6.00~17.00 | 1.0~8.5 | M5 | ||||||
25 | 14.00~22.00 | 8.00~21.00 | 2.0~10.5 | M5 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.5 | M5 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.5 | M5 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~12.0 | M5 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.5 | M5 |