We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
GJPDSPC2-[1.5-2/0.01]
Description
Small Flat Head/Standard/P Configurable
Stock availability:
On request
If you are inspecting MISUMI GJPDSPC2-[1.5-2/0.01], reach FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and particular attention to each customer. We esteem everyone, who cooperated with us - therefore, our regular clients obtain the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Argentina, Bahamas, Colombia, Mozambique, Paraguay, Comoros, Djibouti, Brazil, Croatia, Singapore, Mauritius, Cape Verde, Greece, Japan, El Salvador, Czech Republic, Benin, Philippines, Malta, Yemen, Chad, Swaziland, Indonesia, Sierra Leone, The Gambia, Bolivia, Haiti, South Korea, Antigua and Barbuda, Luxembourg, Albania, Panama, Mexico, Suriname, Austria, Qatar, Denmark. A advanced logistics chains and a partnership network let us to dispatch our products anywhere in the planet with no delay without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this amount is ascending every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | D Tolerance Code | ||
P Selectable | P Configurable | P, L, B Configurable | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDB | JPDS | FPDS | C (m6) PC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPDS | GFPDS | ||
EN 1.2510 Equiv. | - | - | - | - | BFPDS | ||
EN 1.4301 Equiv.* | - | - | SJPDB | SJPDS | SFPDS | ||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | HJPDS | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | - | CFPDS |
Part Number | - | P | - | L | - | B |
JPDSC4 FPDSC4 | - - | 2.55 P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | |||||||||||||
Type | D Tol. | D | D dim. Tolerance | ||||||||||||||
m6 | p6 | ||||||||||||||||
JPDB SJPDB | C (m6) PC (p6) | 3 | +0.008 +0.002 | +0.012 +0.006 | 2 | 5 | 3 | 1 | 0.1 | ||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 0.5 | ||||||||||||
5 | 2 | 3 | 4 | 8 | |||||||||||||
6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||
10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||
16 | +0.018 +0.007 | +0.029 +0.018 | 10 | 13 | 22 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
JPDS GJPDS SJPDS HJPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 4 | 3 | 0 | 0.1 |
3 | 1.50~3.00 | 5 | 1 | ||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 0.5 | |||||
5 | 2.00~5.00 | 8 | |||||||
6 | 2.00~6.00 | 10 | 4 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 12 | 2 | 1 | |||
10 | 3.00~10.00 | 16 | 5 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 20 | 6 | 1.5 | |||
13 | 6.00~13.00 | 22 | 10 | 2 | |||||
16 | 10.00~16.00 | 12 | 3 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||||
Type | D Tol. | D | D dim. Tolerance | ||||||
m6 | p6 | ||||||||
FPDS GFPDS BFPDS SFPDS CFPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 2~4 | 3.0~10.0 | 0 | 0.1 |
3 | 1.50~3.00 | 3~6 | 3.0~10.0 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 4.0~10.0 | 0.5 | |||
5 | 2.00~5.00 | 5~10 | 4.0~10.0 | ||||||
6 | 2.00~6.00 | 6~12 | 4.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 6.0~15.0 | 1 | |||
10 | 3.00~10.00 | 10~20 | 6.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 6.0~20.0 | 1.5 | |||
13 | 6.00~13.00 | 13~26 | 6.0~20.0 | 2 | |||||
16 | 10.00~16.00 | 16~32 | 7.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 7.0~20.0 |