We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FPQTA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI FPQTA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and individual attention to each purchaser. We cherish everyone, who cooperated with us - so, our regular customers bring in the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Cameroon, Algeria, Montenegro, Papua New Guinea, Liberia, Mauritius, France, Mali, Ghana, Haiti, Serbia, Madagascar, Kenya, Tunisia, The Bahamas, Burkina Faso, El Salvador, North Korea, Zimbabwe, Mauritania, Kiribati, Togo, Greece, Dominica, The Gambia, Djibouti, Chile, Belarus, Botswana, United Arab Emirates, Swaziland, Cyprus, Estonia, Switzerland, Morocco, Qatar, Philippines, Seychelles, Turkey. A well-elaborated logistics system and a partnership network help us to ship our goods anywhere in the earth immediately without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.
To inquire or book, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | |||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | 6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | 8 | M3 | 147 | 5 | ||||||||||
8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | 676 | 8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 8 | M3 | 147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 15 | M5 | 676 | 8 | 3.5 | |||
8T | M4 | 333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | 676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~10.0 | M2 | - | 3 | 2.2 |
6 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | M3 | 147 | 5 | 3 | |||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | M5 | 676 | 8 | 3.5 | ||
8T | 6(12)~16 | M4 | 333 | 6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | 676 | 8 | 4 | |||
10T | 6(12)~16 | M4 | 333 | 6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | 676 | 8 | 5 | ||
12T | 8(12)~18 | M4 | 333 | 6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | 8(14)~20 | M6 | 1156 | 9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | 9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | 9 |