We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPDQS8-P[5-13/0.01]-L[14-22/1]-B[5-20/0.1]-G[3-9/1]-A[2-12/0.1]
Description
Spherical Large Head/Setscrew Mounting Shank
Stock availability:
On request
If you are seeking MISUMI JPDQS8-P[5-13/0.01]-L[14-22/1]-B[5-20/0.1]-G[3-9/1]-A[2-12/0.1], communicate with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each buyer. We appreciate everyone, who liased with us - so, our regular buyers get the most flexible purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, South Sudan, Nepal, Spain, Lebanon, Haiti, Croatia, Brazil, Serbia, Suriname, Seychelles, Papua New Guinea, France, Mauritania, Czech Republic, Singapore, Bosnia and Herzegovina, Honduras, Monaco, Samoa, El Salvador, Ukraine, Morocco, Niger, China, Tonga, Malaysia, Botswana, Montenegro, Fiji, Nigeria, Liechtenstein, Poland, Kyrgyzstan, United States, Afghanistan, Iraq, Tajikistan, Indonesia, Panama, Togo, Mauritius, Bolivia. A well-developed logistics series and a partnership network help us to ship our goods anywhere in the planet promptly without compromising product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or book, phone us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||
Circumference Groove | Notched | Set Screw Flat | |||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPGQ | JPCQ | JPDQ | S (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPGQ | GJPCQ | - | ||
EN 1.4301 Equiv. | - | - | SJPGQ | SJPCQ | - | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPGQ | - | - |
Part Number | - | P | - | L | - | B | - | G | - | A | - | Flat Position |
JPGQS10 SJPCQD8 | - - | P12.00 P5.05 | - - | L6 L15 | - - | B3.5 B10.1 | - | G4 | - | A8.0 | - | Y |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | d | 1 | 2 | C1 | (W) | ||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | |||||||
JPGQ GJPGQ SJPGQ CJPGQ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 2.00~10.00 | 3~12 | 2.0~20.0 | 4.5 | 5 | 5 | 1 | 3 | 1.5 |
6S | 2~12 | 2 | 0.5 | |||||||||
8 | -0.005 -0.014 | 3.00~13.00 | 4~16 | 6.5 | 6 | 6 | 1.5 | 3.5 | 1.8 | |||
8S | 3~16 | 3 | 0.5 | |||||||||
10 | 3.00~15.00 | 5~20 | 3.0~20.0 | 8 | 8 | 8 | 2 | 4 | 2.2 | |||
10S | 4~20 | 3 | 0.5 | |||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 6~24 | 10 | 8 | 2 | 5 | 2.5 | ||||
12S | 5~24 | 4 | 0.5 | |||||||||
16 | 10.00~25.00 | 8~32 | 5.0~20.0 | 14 | 8 | 3 | 7 | 4 | ||||
16S | 7~32 | 4 | 0.5 | |||||||||
20 | -0.007 -0.020 | 13.00~30.00 | 10~40 | 18 | 8 | 3 | 9 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | G 1mm Increment | A 0.1mm Increment | Flat Position | 3 | 4 | h | C | Applicable Set Screw | * Tightening Torque Ncm | (W) | |||||
Type | Shape | D | D dim. Tolerance g6 | When D | When DP | |||||||||||||
(Notched) JPCQ GJPCQ SJPCQ | (Set Screw Flat) JPDQ | S (Round) D (Diamond) | 6 | -0.004 -0.012 | 5.00~10.00 | 12~20 | 5.0~20.0 | 3~9 | 2.0~8.0 | X Y Applicable to Diamond Shape Type only. | 5.5 | 2.5 | 1 | 1 | M4 | 333 | 3 | 1.5 |
8 | -0.005 -0.014 | 5.00~13.00 | 14~22 | 2.0~12.0 | 7.5 | 3.5 | 1.2 | 1.5 | M5 | 676 | 3.5 | 1.8 | ||||||
10 | 5.00~15.00 | 15~25 | 2.0~16.0 | 2 | M6 | 1156 | 4 | 2.2 | ||||||||||
12 | -0.006 -0.017 | 5.00~16.00 | 15~25 | 2.0~20.0 | 5 | 2.5 | ||||||||||||
16 | 10.00~25.00 | 24~35 | 2.0~28.0 | 10.5 | 5.5 | 2 | 3 | M8 | 2803 | 7 | 4 | |||||||
20 | -0.007 -0.020 | 13.00~30.00 | 27~40 | 2.0~36.0 | 13.5 | 8.5 | 9 | 5 |