We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
ANS10-50
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are questing MISUMI ANS10-50, call FAMAGA, the world's top supplier of streamlined equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of outputs and individual attention to each consumer. We value everyone, who collaborated with us - therefore, our regular customers pick up the most convenient purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 3500 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Dominican Republic, Lebanon, Algeria, Cambodia, Morocco, South Sudan, Netherlands, Argentina, Lesotho, Angola, China, Greece, Romania, Honduras, Vietnam, Eritrea, Niger, Poland, Bosnia and Herzegovina, Cape Verde, Rwanda, Fiji, Kazakhstan, Benin, Finland, United States, Austria, Zimbabwe, Ukraine, Mexico, Jordan, Ireland, Mauritius, Burkina Faso, Kuwait, Bangladesh, Sweden, Comoros, Togo, Seychelles, Yemen, Kyrgyzstan, Iceland, Cyprus, Slovakia. A well-built logistics connection and a partnership network assist us to deliver our elements anywhere in the planet promptly without compromising product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To get some advice or place an order, get in touch with us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | 1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |